參考資料：http://blog.chinaunix.net/uid-10697776-id-3080243.html
              http://hi.baidu.com/widebright/item/2f28cd0da72b9210addc70a7

問：dell的optiplex 360或者optiplex 380機器，broadcom網卡如何在redhat enterprise linux 5系統下識別和安裝驅動？

答案如下：
首先看網卡是否已經正確連接到計算機，使用的命令是lspci。redhat上使用lspci的輸出：
[root@localhost ~]# lspci
00:00.0 Host bridge: Intel Corporation Eaglelake DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Eaglelake PCI Express Root Port (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Eaglelake Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Eaglelake Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)

會發現系統識別不到這個網卡的設備，需要更新網卡設備讀取文件，具體是：
用update-pciids 命令先更新一下 系統的pci.ids文件，這個最新的應該有人維護的在http://pciids.sourceforge.net/ 可以找得到。
或者像我這樣直接手工更新一下/usr/share/hwdata/pci.ids 文件的內容。
把pci.ids文件放到tmp目錄
Redhat上使用命令：cp /tmp/pci.ids /usr/share/hwdata/pci.ids；回車后回復yes
再次執行l(wèi)spci，結果如下，成功識別。
[root@localhost ~]# cp /tmp/llj/pci.ids /usr/share/hwdata/pci.ids
cp：是否覆蓋“/usr/share/hwdata/pci.ids”? yes
[root@localhost ~]# lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)

網卡成功識別后，使用ifconfig命令看網卡信息，發現沒有eth0，需要進行如下操作：
下載網卡驅動安裝包：
kernel-2.6.18-92.el5.i686.rpm
kernel-devel-2.6.18-92.el5.i686.rpm
kernel-xen-2.6.18-92.el5.i686.rpm
kernel-xen-devel-2.6.18-92.el5.i686.rpm
tg3-3.122n-1.src.rpm
使用rpm –ivh 命令安裝上面的kernel包
Tg3包安裝步驟如下：
[root@localhost llj]# rpm -ivh tg3-3.122n-1.src.rpm
1:tg3                    ########################################### [100%]
[root@localhost llj]# cd /usr/src/redhat/
[root@localhost redhat]# rpmbuild -bb SPECS/tg3.spec
[root@localhost redhat]# rpm -ivh RPMS/i386/tg3-3.122n-1.i386.rpm
Preparing...                ########################################### [100%]
1:tg3                    ########################################### [100%]
[root@localhost redhat]# modprobe tg3
打開網絡設備：[root@linpcl root]#ifconfig eth0 up
使用命令ifconfig查看可看見eth0

到此Dell optiplex 380 broadcom網卡在redhat 5下網卡識別和安裝驅動完畢。^_^。