Junky's IT Notebook

LDAPErrorCodes

Hex	Decimal	Constant: Description
0x00	0	LDAP_SUCCESS: Indicates the requested client operation completed successfully.
0x01	1	LDAP_OPERATIONS_ERROR: Indicates an internal error. The server is unable to respond with a more specific error and is also unable to properly respond to a request. It does not indicate that the client has sent an erroneous message. In NDS 8.3x through NDS 7.xx, this was the default error for NDS errors that did not map to an LDAP error code. To conform to the new LDAP drafts, NDS 8.5 uses 80 (0x50) for such errors.
0x02	2	LDAP_PROTOCOL_ERROR: Indicates that the server has received an invalid or malformed request from the client.
0x03	3	LDAP_TIMELIMIT_EXCEEDED: Indicates that the operation's time limit specified by either the client or the server has been exceeded. On search operations, incomplete results are returned.
0x04	4	LDAP_SIZELIMIT_EXCEEDED: Indicates that in a search operation, the size limit specified by the client or the server has been exceeded. Incomplete results are returned.
0x05	5	LDAP_COMPARE_FALSE: Does not indicate an error condition. Indicates that the results of a compare operation are false.
0x06	6	LDAP_COMPARE_TRUE: Does not indicate an error condition. Indicates that the results of a compare operation are true.
0x07	7	LDAP_AUTH_METHOD_NOT_SUPPORTED: Indicates that during a bind operation the client requested an authentication method not supported by the LDAP server.
0x08	8	LDAP_STRONG_AUTH_REQUIRED: Indicates one of the following: In bind requests, the LDAP server accepts only strong authentication. In a client request, the client requested an operation such as delete that requires strong authentication. In an unsolicited notice of disconnection, the LDAP server discovers the security protecting the communication between the client and server has unexpectedly failed or been compromised.
0x09	9	Reserved.
0x0A	10	LDAP_REFERRAL: Does not indicate an error condition. In LDAPv3, indicates that the server does not hold the target entry of the request, but that the servers in the referral field may.
0x0B	11	LDAP_ADMINLIMIT_EXCEEDED: Indicates that an LDAP server limit set by an administrative authority has been exceeded.
0x0C	12	LDAP_UNAVAILABLE_CRITICAL_EXTENSION: Indicates that the LDAP server was unable to satisfy a request because one or more critical extensions were not available. Either the server does not support the control or the control is not appropriate for the operation type.
0x0D	13	LDAP_CONFIDENTIALITY_REQUIRED: Indicates that the session is not protected by a protocol such as Transport Layer Security (TLS), which provides session confidentiality.
0x0E	14	LDAP_SASL_BIND_IN_PROGRESS: Does not indicate an error condition, but indicates that the server is ready for the next step in the process. The client must send the server the same SASL mechanism to continue the process.
0x0F	15	Not used.
0x10	16	LDAP_NO_SUCH_ATTRIBUTE: Indicates that the attribute specified in the modify or compare operation does not exist in the entry.
0x11	17	LDAP_UNDEFINED_TYPE: Indicates that the attribute specified in the modify or add operation does not exist in the LDAP server's schema.
0x12	18	LDAP_INAPPROPRIATE_MATCHING: Indicates that the matching rule specified in the search filter does not match a rule defined for the attribute's syntax.
0x13	19	LDAP_CONSTRAINT_VIOLATION: Indicates that the attribute value specified in a modify, add, or modify DN operation violates constraints placed on the attribute. The constraint can be one of size or content (string only, no binary).
0x14	20	LDAP_TYPE_OR_VALUE_EXISTS: Indicates that the attribute value specified in a modify or add operation already exists as a value for that attribute.
0x15	21	LDAP_INVALID_SYNTAX: Indicates that the attribute value specified in an add, compare, or modify operation is an unrecognized or invalid syntax for the attribute.
	22-31	Not used.
0x20	32	LDAP_NO_SUCH_OBJECT: Indicates the target object cannot be found. This code is not returned on following operations: Search operations that find the search base but cannot find any entries that match the search filter. Bind operations.
0x21	33	LDAP_ALIAS_PROBLEM: Indicates that an error occurred when an alias was dereferenced.
0x22	34	LDAP_INVALID_DN_SYNTAX: Indicates that the syntax of the DN is incorrect. (If the DN syntax is correct, but the LDAP server's structure rules do not permit the operation, the server returns LDAP_UNWILLING_TO_PERFORM.)
0x23	35	LDAP_IS_LEAF: Indicates that the specified operation cannot be performed on a leaf entry. (This code is not currently in the LDAP specifications, but is reserved for this constant.)
0x24	36	LDAP_ALIAS_DEREF_PROBLEM: Indicates that during a search operation, either the client does not have access rights to read the aliased object's name or dereferencing is not allowed.
	37-47	Not used.
0x30	48	LDAP_INAPPROPRIATE_AUTH: Indicates that during a bind operation, the client is attempting to use an authentication method that the client cannot use correctly. For example, either of the following cause this error: The client returns simple credentials when strong credentials are required. The client returns a DN and a password for a simple bind when the entry does not have a password defined.
0x31	49	LDAP_INVALID_CREDENTIALS: Indicates that during a bind operation one of the following occurred: The client passed either an incorrect DN or password. The password is incorrect because it has expired, intruder detection has locked the account, or some other similar reason.
0x32	50	LDAP_INSUFFICIENT_ACCESS: Indicates that the caller does not have sufficient rights to perform the requested operation.
0x33	51	LDAP_BUSY: Indicates that the LDAP server is too busy to process the client request at this time but if the client waits and resubmits the request, the server may be able to process it then.
0x34	52	LDAP_UNAVAILABLE: Indicates that the LDAP server cannot process the client's bind request, usually because it is shutting down.
0x35	53	LDAP_UNWILLING_TO_PERFORM: Indicates that the LDAP server cannot process the request because of server-defined restrictions. This error is returned for the following reasons: The add entry request violates the server's structure rules. The modify attribute request specifies attributes that users cannot modify. Password restrictions prevent the action. Connection restrictions prevent the action.
0x36	54	LDAP_LOOP_DETECT: Indicates that the client discovered an alias or referral loop, and is thus unable to complete this request.
	55-63	Not used.
0x40	64	LDAP_NAMING_VIOLATION: Indicates that the add or modify DN operation violates the schema's structure rules. For example, The request places the entry subordinate to an alias. The request places the entry subordinate to a container that is forbidden by the containment rules. The RDN for the entry uses a forbidden attribute type.
0x41	65	LDAP_OBJECT_CLASS_VIOLATION: Indicates that the add, modify, or modify DN operation violates the object class rules for the entry. For example, the following types of request return this error: The add or modify operation tries to add an entry without a value for a required attribute. The add or modify operation tries to add an entry with a value for an attribute which the class definition does not contain. The modify operation tries to remove a required attribute without removing the auxiliary class that defines the attribute as required.
0x42	66	LDAP_NOT_ALLOWED_ON_NONLEAF: Indicates that the requested operation is permitted only on leaf entries. For example, the following types of requests return this error: The client requests a delete operation on a parent entry. The client request a modify DN operation on a parent entry.
0x43	67	LDAP_NOT_ALLOWED_ON_RDN: Indicates that the modify operation attempted to remove an attribute value that forms the entry's relative distinguished name.
0x44	68	LDAP_ALREADY_EXISTS: Indicates that the add operation attempted to add an entry that already exists, or that the modify operation attempted to rename an entry to the name of an entry that already exists.
0x45	69	LDAP_NO_OBJECT_CLASS_MODS: Indicates that the modify operation attempted to modify the structure rules of an object class.
0x46	70	LDAP_RESULTS_TOO_LARGE: Reserved for CLDAP.
0x47	71	LDAP_AFFECTS_MULTIPLE_DSAS: Indicates that the modify DN operation moves the entry from one LDAP server to another and thus requires more than one LDAP server.
	72-79	Not used.
0x50	80	LDAP_OTHER: Indicates an unknown error condition. This is the default value for NDS error codes which do not map to other LDAP error codes.

 

 

 

LDAP Status Code	Meaning	Exception or Action
0	Success	Report success.
1	Operations error	NamingException
2	Protocol error	CommunicationException
3	Time limit exceeded.	TimeLimitExceededException
4	Size limit exceeded.	SizeLimitExceededException
5	Compared false.	Used by DirContext.search(). Does not generate an exception.
6	Compared true.	Used by DirContext.search(). Does not generate an exception.
7	Authentication method not supported.	AuthenticationNotSupportedException
8	Strong authentication required.	AuthenticationNotSupportedException
9	Partial results being returned.	If the environment property "java.naming.referral" is set to "ignore" or the contents of the error do not contain a referral, throw a PartialResultException. Otherwise, use contents to build a referral.
10	Referral encountered.	If the environment property "java.naming.referral" is set to "ignore", then ignore. If the property is set to "throw", throw ReferralException. If the property is set to "follow", then the LDAP provider processes the referral. If the "java.naming.ldap.referral.limit" property has been exceeded, throw LimitExceededException.
11	Administrative limit exceeded.	LimitExceededException
12	Unavailable critical extension requested.	OperationNotSupportedException
13	Confidentiality required.	AuthenticationNotSupportedException
14	SASL bind in progress.	Used internally by the LDAP provider during authentication.
16	No such attribute exists.	NoSuchAttributeException
17	An undefined attribute type.	InvalidAttributeIdentifierException
18	Inappropriate matching	InvalidSearchFilterException
19	A constraint violation.	InvalidAttributeValueException
20	An attribute or value already in use.	AttributeInUseException
21	An invalid attribute syntax.	InvalidAttributeValueException
32	No such object exists.	NameNotFoundException
33	Alias problem	NamingException
34	An invalid DN syntax.	InvalidNameException
35	Is a leaf.	Used by the LDAP provider; usually doesn't generate an exception.
36	Alias dereferencing problem	NamingException
48	Inappropriate authentication	AuthenticationNotSupportedException
49	Invalid credentials	AuthenticationException
50	Insufficient access rights	NoPermissionException
51	Busy	ServiceUnavailableException
52	Unavailable	ServiceUnavailableException
53	Unwilling to perform	OperationNotSupportedException
54	Loop detected.	NamingException
64	Naming violation	InvalidNameException
65	Object class violation	SchemaViolationException
66	Not allowed on non-leaf.	ContextNotEmptyException
67	Not allowed on RDN.	SchemaViolationException
68	Entry already exists.	NameAlreadyBoundException
69	Object class modifications prohibited.	SchemaViolationException
71	Affects multiple DSAs.	NamingException
80	Other	NamingException

 

 

posted on 2007-06-26 10:33 junky 閱讀(954) 評論(0)  編輯  收藏 所屬分類: database