java技術研究

網上的文檔寫的有些問題，只可以參考，可以按住我下邊的總結的，安裝外圍包，然后再編譯安裝即可

 

wget -c http://repo.varnish-cache.org/source/varnish-3.0.2.tar.gz

yum instll -y automake
yum instll -y autoconf
yum instll -y libtool
yum instll -y ncurses-devel
yum instll -y libxslt
yum instll -y groff
yum instll -y pcre-devel
yum instll -y pkgconfig
yum instll -y automake
yum instll -y  automake
yum install -y autoconf
yum install -y libtool
yum install -y ncurses-devel
yum install -y libxslt
yum install -y groff
yum install -y pcre-devel
yum install -y pkgconfig
groupadd www
useradd www -g www -s /sbin/nologin

yum -y install patch make gcc gcc-c++ gcc-g77 flex bison file
yum -y install libtool libtool-libs autoconf kernel-devel
yum -y install libjpeg libjpeg-devel libpng libpng-devel libpng10 libpng10-devel gd gd-devel
yum -y install freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel
yum -y install glib2 glib2-devel bzip2 bzip2-devel libevent libevent-devel
yum -y install ncurses ncurses-devel curl curl-devel e2fsprogs
yum -y install e2fsprogs-devel krb5 krb5-devel libidn libidn-devel
yum -y install openssl openssl-devel vim-minimal nano sendmail
yum -y install fonts-chinese gettext gettext-devel
yum -y install ncurses-devel
yum -y install gmp-devel pspell-devel
yum -y install unzip

cd /varnish

./configure --prefix=/opt/varnish

make ;make install

啟動：

/opt/varnish/sbin/varnishd -f /opt/varnish/etc/varnish/killwin.vcl -a 42.121.12.4:80 -s malloc,256m  -T 127.0.0.1:2000 -p http_resp_hdr_len=8192
下邊的網絡轉載的

 

 

 

 

簡述：Varnish是一款高性能的開源HTTP加速器，挪威最大的在線報紙 Verdens Gang 使用3臺Varnish代替了原來的12臺Squid，性能比以前更好。

系統環境：
CentOS release 5.5 (Final) 64-bit

所需軟件：
varnish-2.1.4.tar.gz

Varnish官方網站：

http://www.varnish-cache.org/

安裝前準備：

創建www用戶和組，以及Varnish緩存文件存放目錄（/elain/data/vcache）：
/usr/sbin/groupadd www -g 600
/usr/sbin/useradd -u 600 -g www www
mkdir -p /elain/data/vcache
chmod +w /elain/data/vcache
chown -R www:www /elain/data/vcache

創建Varnish日志目錄（/elain/logs/varnish）：
mkdir -p /elain/logs/varnish
chmod +w /elain/logs/varnish
chown -R www:www /elain/logs/varnish

安裝：
wget http://cdnetworks-kr-1.dl.sourceforge.net/project/pcre/pcre/8.12/pcre-8.12.tar.gz
tar zxvf pcre-8.12.tar.gz
cd pcre-8.12/
./configure --prefix=/elain/apps/pcre
make && make install
cd ../

wget http://repo.varnish-cache.org/source/varnish-2.1.5.tar.gz
tar zxvf varnish-2.1.5.tar.gz
cd varnish-2.1.5
export PKG_CONFIG_PATH=/elain/apps/pcre/lib/pkgconfig
./configure -prefix=/elain/apps/varnish
make
make install
cd ..

配置：
默認配置文件樣板：
/elain/apps/varnish/etc/varnish/default.vcl

cd /elain/apps/varnish/etc/varnish/
cp default.vcl  elain_vcl.conf
vi elain_vcl.conf
#############################
backend www {
.host = "www.elain.org";
.port = "80";
}

acl purge {
"localhost";
"127.0.0.1";
"172.16.2.0"/24;
}

sub vcl_recv {
if (req.restarts == 0) {
if (req.http.x-forwarded-for) {
set req.http.X-Forwarded-For =
req.http.X-Forwarded-For ", " client.ip;
} else {
set req.http.X-Forwarded-For = client.ip;
}
}
if (req.request != "GET" &&
req.request != "HEAD" &&
req.request != "PUT" &&
req.request != "POST" &&
req.request != "TRACE" &&
req.request != "OPTIONS" &&
req.request != "DELETE") {
/* Non-RFC2616 or CONNECT which is weird. */
return (pipe);
}
if (req.request != "GET" && req.request != "HEAD") {
/* We only deal with GET and HEAD by default */
return (pass);
}
if (req.http.Authorization || req.http.Cookie) {
/* Not cacheable by default */
return (pass);
}

else {
lookup;
}
return (lookup);
}

sub vcl_pipe {
return (pipe);
}

sub vcl_pass {
return (pass);
}

sub vcl_hash {
set req.hash += req.url;
if (req.http.host) {
set req.hash += req.http.host;
} else {
set req.hash += server.ip;
}
return (hash);
}

sub vcl_hit {
if (!obj.cacheable) {
return (pass);
}
return (deliver);
}

sub vcl_miss {
return (fetch);
}

sub vcl_fetch {
if (!beresp.cacheable) {
return (pass);
}
if (beresp.http.Set-Cookie) {
return (pass);
}
return (deliver);
}

sub vcl_deliver {
return (deliver);
}

sub vcl_error {
set obj.http.Content-Type = "text/html; charset=utf-8";
synthetic {"
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html>
<head>
<title>"} obj.status " " obj.response {"</title>
</head>
<body>
<h1>Error "} obj.status " " obj.response {"</h1>
<p>"} obj.response {"</p>
<h3>Guru Meditation:</h3>
<p>XID: "} req.xid {"</p>
<hr>
<p>Varnish cache server</p>
</body>
</html>
"};
return (deliver);
}
###################################
配置文件解釋：
(1)、Varnish通過反向代理請求后端IP為172.16.2.223，端口為80的web服務器；
(2)、Varnish允許localhost、127.0.0.1、172.16.2.233 三個來源IP通過PURGE方法清除緩存；
(3)、Varnish對域名為www.elain.org的請求進行處理，非www.elain.org域名的請求則返回“elain Cache Server”；
(4)、Varnish對HTTP協議中的GET、HEAD請求進行緩存，對POST請求透過，讓其直接訪問后端Web服務器。之所以這樣配置，是因為POST請求一般是發送數據給服務器的，需要服務器接收、處理，所以不緩存；
(5)、Varnish對以.txt和.js結尾的URL緩存時間設置1小時，對其他的URL緩存時間設置為30天。

啟動Varnish
ulimit -SHn 65535
/elain/apps/varnish/sbin/varnishd -f /elain/apps/varnish/etc/varnish/elain_vcl.conf -a 172.16.2.223:80 -s file,/elain/data/vcache,1G -w 1024,51200,10 -t 3600 -T 172.16.2.223:3500

參數:
-u 以什么用運行
-g 以什么組運行
-f varnish 配置文件
-a 綁定 IP 和端口
-s varnish 緩存文件位置與大小
-w 最小,最大線程和超時時間
-T varnish 管理端口,主要用來清除緩存

啟動varnishncsa用來將Varnish訪問日志寫入日志文件：
/elain/apps/varnish/bin/varnishncsa  -w /elain/logs/varnish.log &

停止Varnish
pkill varnish

配置開機自動啟動Varnish
vi /etc/rc.local
在末尾增加以下內容：

ulimit -SHn 65535
/elain/apps/varnish/sbin/varnishd -f /elain/apps/varnish/etc/varnish/elain_vcl.conf -a 172.16.2.223:80 -s file,/elain/data/vcache,1G -w 1024,51200,10 -t 3600 -T 172.16.2.223:3500
/elain/apps/varnish/bin/varnishncsa -n /elain/data/vcache -w /elain/logs/varnish.log &

優化Linux內核參數
vi /etc/sysctl.conf
在末尾增加以下內容：

net.ipv4.tcp_fin_timeout = 30
net.ipv4.tcp_keepalive_time = 300
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.ip_local_port_range = 5000    65000

sysctl -p

管理Varnish：
1、查看Varnish服務器連接數與命中率：
/elain/apps/varnish/bin/varnishstat

2、通過Varnish管理端口進行管理：
用help看看可以使用哪些Varnish命令：
/elain/apps/varnish/bin/varnishadm -T 172.16.2.223:3500 help

[root@vanish ~]# /elain/apps/varnish/bin/varnishadm -T 172.16.2.223:3500 help
help [command]
ping [timestamp]
auth response
quit
banner
status
start
stop
stats
vcl.load <configname> <filename>
vcl.inline <configname> <quoted_VCLstring>
vcl.use <configname>
vcl.discard <configname>
vcl.list
vcl.show <configname>
param.show [-l] [<param>]
param.set <param> <value>
purge.url <regexp>
purge <field> <operator> <arg> [&& <field> <oper> <arg>]...
purge.list

3、通過Varnish管理端口，使用正則表達式批量清除緩存：
(1)、例：清除類似http://www.elain.org/download/111.html的URL地址）：
/elain/apps/varnish/bin/varnishadm -T 172.16.2.223:3500 url.purge /download/

(2)、例：清除類似http://www.elain.org/dl 的URL地址：
/elain/apps/varnish/bin/varnishadm -T 172.16.2.223:3500 url.purge w*$

(3)、例：清除所有緩存：
/elain/apps/varnish/bin/varnishadm -T 172.16.2.223:3500 url.purge *$

Varnish日志切割腳本
cat /root/scripts/cut_varnish_log.sh

#!/bin/sh
# This script run at 00:00
date=$(date -d "yesterday" +"%Y-%m-%d")
pkill -9 varnishncsa
mv /elain/logs/varnish/images.log /elain/logs/varnish/${date}.log
/elain/apps/varnish/bin/varnishncsa -w /elain/logs/varnish/images.log &
mkdir -p /elain/logs/varnish/logsbak/
gzip -c /elain/logs/varnish/${date}.log > /elain/logs/varnish/logsbak/${date}.log.gz
rm -f /elain/logs/varnish/${date}.log
rm -f /elain/logs/varnish/logsbak/$(date -d "-1 month" +"%Y-%m*").log.gz

chmod 700 /root/scripts/cut_varnish_log.sh

設置在每天00:00定時執行：
crontab -e

# Info   : 每天切割varnish日志
# Author : dingtm
# CTime  : 2011.04.08
0 0 * * *  /root/scripts/cut_varnish_log.sh

官方文檔：

http://www.varnish-cache.org/docs/2.1/

推薦參考文檔見附件