耐心無止境 成功一瞬間

          BlogJava 聯系 聚合 管理
            31 Posts :: 5 Stories :: 25 Comments :: 0 Trackbacks
          我的顯卡是Geforce8600GT,在fedora8下安裝新的驅動(169.xx)后竟然無法進入系統。

          在顯示登錄界面前,屏幕變灰,然后在屏幕的中央出現一條垂直的黑色寬的豎條,登錄界面根本就不顯示。

          不知道什么原因,向nvidia報bug也沒有回復。

          在ubuntu下竟然可以使用源里面的驅動,運行非常流暢。

          posted on 2008-03-08 22:25 Joshua Yan 閱讀(1191) 評論(1)  編輯  收藏 所屬分類: Linux

          Feedback

          # re: 為什么在fedora下面不能安裝新的nvidia驅動呢 2008-03-09 20:33 Joshua Yan
          經過網上fedora論壇的大蝦幫忙,我終于成功安裝了驅動,留下個腳印吧。

          1. download the 100.14.19 driver from the nvidia site.
          http://www.nvidia.com/object/linux_d...100.14.19.html
          2. logout. at the login screen, press ctrl+alt+f1 (or whatever) to go to text console and login.
          3. stop gdm (or kdm, if you're using KDE).
          Code:

          sudo /etc/init.d/gdm stop

          4. install the nvidia 100.14.19 driver (instructions on nvidia website).
          5. reboot.
          Code:

          sudo reboot

          6. ubuntu might display a warning about low resolution etc, continue. (if you are at this step, it means you haven't got the white screen).
          7. adjust the resolution, if you wish.
          8. go to system tools -> nvidia settings. if this menu option is not there, it means the driver was not installed properly. go back.
          9. if you get a message saying the driver "nvidia" is not enabled, enable it by going to system -> administration -> restricted device manager. enable the driver.
          10. may need to reboot at this time.
          11. make sure you don't have get white screen. log in. you may see the low resolution dialog again. adjust if you wish.
          12. open nvidia settings. at this point, nvidia-settings should be properly displaying all the options.
          13. under GPU0, select DFP-0 (in my case, DFP0 - Seiko). you should see a button "Acquire EDID". click it, you will be prompted to save a file. save it somewhere(for eg ~/edid.bin) and copy it to /etc/X11 (for convenience). THIS IS THE KEY STEP. GET THE EDID.
          Code:

          sudo cp ~/edid.bin /etc/X11/edid.bin

          14. remember to thank destny.
          15. logout. go to text console (ctrl+alt+f1). login (text console).
          16. run envy in text mode.
          Code:

          sudo envy -t

          17. in envy, clean any earlier nvidia driver installation (100.14.19).
          18. in envy, install the new nvidia driver. let envy configure xorg.conf, but do not reboot.
          19. open the xorg.conf file
          Code:

          sudo nano /etc/X11/xorg.conf

          look for section "Device". Add the following line:
          Code:

          Option "CustomEDID" "DFP-0:/etc/X11/edid.bin"

          thank destny for this.
          20. under section "Screen", subsection "Display", make sure your default mode is listed. it wasn't in my case. i added "1280x800" "1024x768" "800x600" to the Modes line.
          21. save and close xorg.conf, reboot.
          22. at the gui login screen, you may notice that the resolution is still not proper. if so, login and adjust the resolution. also make sure you can see all the options in nvidia-settings.
          23. you're set. i rebooted once again just to make sure things were smooth.
          24. thank destny.
          25. get back to work.

          可以不用envy安裝驅動,可以手動安裝或者用yum安裝,然后添加那個EDID的選項就可以了。

          終于可以使用新的驅動了,太高興了。

          os: fedora 8
          graphic card: Geforce 8600M GT
          driver version: 169.12

            回復  更多評論
            

          主站蜘蛛池模板: 彭阳县| 康保县| 六安市| 凤冈县| 原阳县| 蕲春县| 商南县| 铜陵市| 华亭县| 辽宁省| 钟山县| 贡嘎县| 井陉县| 潞城市| 和龙市| 松潘县| 嘉义县| 鄂伦春自治旗| 北海市| 盐池县| 墨玉县| 德格县| 株洲县| 庄河市| 当雄县| 青田县| 班玛县| 光泽县| 桃园县| 梓潼县| 文成县| 岳池县| 穆棱市| 荣昌县| 滨海县| 韶关市| 贡觉县| 西吉县| 文化| 临安市| 分宜县|