#encoding=UTF-8
# Configuration files must begin with a line specifying the encoding
# of the the file.
#********************************************************************
# Wrapper License Properties (Ignored by Community Edition)
#********************************************************************
# Professional and Standard Editions of the Wrapper require a valid
# License Key to start. Licenses can be purchased or a trial license
# requested on the following pages:
# http://wrapper.tanukisoftware.com/purchase
# http://wrapper.tanukisoftware.com/trial
# Include file problems can be debugged by removing the first '#'
# from the following line:
##include.debug
# The Wrapper will look for either of the following optional files for a
# valid License Key. License Key properties can optionally be included
# directly in this configuration file.
#include ../conf/wrapper-license.conf
#include ../conf/wrapper-license-%WRAPPER_HOST_NAME%.conf
# The following property will output information about which License Key(s)
# are being found, and can aid in resolving any licensing problems.
#wrapper.license.debug=TRUE
#********************************************************************
# Wrapper Localization
#********************************************************************
# Specify the locale which the Wrapper should use. By default the system
# locale is used.
#wrapper.lang=en_US # en_US or ja_JP
# Specify the location of the Wrapper's language resources. If these are
# missing, the Wrapper will default to the en_US locale.
wrapper.lang.folder=../lang
#********************************************************************
# Wrapper Java Properties
#********************************************************************
# Java Application
# Locate the java binary on the system PATH:
wrapper.java.command=java
# Specify a specific java binary:
#set.JAVA_HOME=/java/path
set.LIB=D:/MonitorApp/lib
#wrapper.java.command=%JAVA_HOME%/bin/java
# Tell the Wrapper to log the full generated Java command line.
#wrapper.java.command.loglevel=INFO
# Java Main class. This class must implement the WrapperListener interface
# or guarantee that the WrapperManager class is initialized. Helper
# classes are provided to do this for you. See the Integration section
# of the documentation for details.
wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp
# Java Classpath (include wrapper.jar) Add class path elements as
# needed starting from 1
echo %LIB%
wrapper.java.classpath.1=%LIB%/wrapper.jar
wrapper.java.classpath.2=%LIB%/commons-beanutils-1.8.3.jar
wrapper.java.classpath.3=%LIB%/commons-codec-1.4.jar
wrapper.java.classpath.4=%LIB%/commons-collections-3.1.jar
wrapper.java.classpath.5=%LIB%/commons-collections-3.2.1.jar
wrapper.java.classpath.6=%LIB%/commons-dbcp-1.3.jar
wrapper.java.classpath.7=%LIB%/commons-dbcp-1.4.jar
wrapper.java.classpath.8=%LIB%/commons-fileupload-1.2.1.jar
wrapper.java.classpath.9=%LIB%/commons-httpclient-3.0.1.jar
wrapper.java.classpath.10=%LIB%/commons-io-1.4.jar
wrapper.java.classpath.11=%LIB%/commons-io-2.0.1.jar
wrapper.java.classpath.12=%LIB%/commons-jexl-1.1.jar
wrapper.java.classpath.13=%LIB%/commons-lang-2.5.jar
wrapper.java.classpath.14=%LIB%/commons-logging-1.1.1.jar
wrapper.java.classpath.15=%LIB%/commons-logging-api-1.1.jar
wrapper.java.classpath.16=%LIB%/commons-management-1.0.jar
wrapper.java.classpath.17=%LIB%/commons-pool-1.5.4.jar
wrapper.java.classpath.18=%LIB%/jedis-2.0.0.jar
wrapper.java.classpath.19=%LIB%/log4j-1.2.14.jar
wrapper.java.classpath.20=%LIB%/quartz-all-1.6.3.jar
wrapper.java.classpath.21=%LIB%/spring-aop-3.0.2.RELEASE.jar
wrapper.java.classpath.22=%LIB%/spring-asm-3.0.2.RELEASE.jar
wrapper.java.classpath.23=%LIB%/spring-beans-3.0.2.RELEASE.jar
wrapper.java.classpath.24=%LIB%/spring-binding-2.0.8.RELEASE.jar
wrapper.java.classpath.25=%LIB%/spring-context-3.0.2.RELEASE.jar
wrapper.java.classpath.26=%LIB%/spring-context-support-3.0.2.RELEASE.jar
wrapper.java.classpath.27=%LIB%/spring-core-3.0.2.RELEASE.jar
wrapper.java.classpath.28=%LIB%/spring-expression-3.0.2.RELEASE.jar
wrapper.java.classpath.29=%LIB%/springside-3.3.2.jar
wrapper.java.classpath.30=%LIB%/spring-test-3.0.2.RELEASE.jar
wrapper.java.classpath.31=%LIB%/spring-tx-3.0.2.RELEASE.jar
wrapper.java.classpath.32=%LIB%/slf4j-api-1.5.8.jar
wrapper.java.classpath.33=%LIB%/slf4j-log4j12-1.5.8.jar
wrapper.java.classpath.34=%LIB%/monitor.jar
wrapper.java.classpath.35=%LIB% #可以讀到這里的文件 xml pro 等
# Java Library Path (location of Wrapper.DLL or libwrapper.so)
wrapper.java.library.path.1=../bin
# Java Bits. On applicable platforms, tells the JVM to run in 32 or 64-bit mode.
wrapper.java.additional.auto_bits=TRUE
# Java Additional Parameters
wrapper.java.additional.1=-Dlog4j.configuration=file:%LIB%/log4j.xml
wrapper.java.additional.2=-Dorg.tanukisoftware.wrapper.WrapperManager.mbean=TRUE
# Initial Java Heap Size (in MB)
wrapper.java.initmemory=128
# Maximum Java Heap Size (in MB)
wrapper.java.maxmemory=512
# Application parameters. Add parameters as needed starting from 1
wrapper.app.parameter.1=com.zjasm.tomcat.TomcatStat
#********************************************************************
# Wrapper Logging Properties
#********************************************************************
# Enables Debug output from the Wrapper.
#wrapper.debug=TRUE
# Format of output for the console. (See docs for formats)
wrapper.console.format=PM
# Log Level for console output. (See docs for log levels)
wrapper.console.loglevel=INFO
# Log file to use for wrapper output logging.
wrapper.logfile=../logs/wrapper.log
# Format of output for the log file. (See docs for formats)
wrapper.logfile.format=LPTM
# Log Level for log file output. (See docs for log levels)
wrapper.logfile.loglevel=INFO
# Maximum size that the log file will be allowed to grow to before
# the log is rolled. Size is specified in bytes. The default value
# of 0, disables log rolling. May abbreviate with the 'k' (kb) or
# 'm' (mb) suffix. For example: 10m = 10 megabytes.
wrapper.logfile.maxsize=0
# Maximum number of rolled log files which will be allowed before old
# files are deleted. The default value of 0 implies no limit.
wrapper.logfile.maxfiles=0
# Log Level for sys/event log output. (See docs for log levels)
wrapper.syslog.loglevel=NONE
#********************************************************************
# Wrapper General Properties
#********************************************************************
# Allow for the use of non-contiguous numbered properties
wrapper.ignore_sequence_gaps=TRUE
# Do not start if the pid file already exists.
wrapper.pidfile.strict=TRUE
# Title to use when running as a console
wrapper.console.title=Test Wrapper Sample Application
#********************************************************************
# Wrapper JVM Checks
#********************************************************************
# Detect DeadLocked Threads in the JVM. (Requires Standard Edition)
wrapper.check.deadlock=TRUE
wrapper.check.deadlock.interval=10
wrapper.check.deadlock.action=RESTART
wrapper.check.deadlock.output=FULL
# Out Of Memory detection.
# (Ignore output from dumping the configuration to the console. This is only needed by the TestWrapper sample application.)
wrapper.filter.trigger.999=wrapper.filter.trigger.*java.lang.OutOfMemoryError
wrapper.filter.allow_wildcards.999=TRUE
wrapper.filter.action.999=NONE
# Ignore -verbose:class output to avoid false positives.
wrapper.filter.trigger.1000=[Loaded java.lang.OutOfMemoryError
wrapper.filter.action.1000=NONE
# (Simple match)
wrapper.filter.trigger.1001=java.lang.OutOfMemoryError
# (Only match text in stack traces if -XX:+PrintClassHistogram is being used.)
#wrapper.filter.trigger.1001=Exception in thread "*" java.lang.OutOfMemoryError
#wrapper.filter.allow_wildcards.1001=TRUE
wrapper.filter.action.1001=RESTART
wrapper.filter.message.1001=The JVM has run out of memory.
#********************************************************************
# Wrapper Email Notifications. (Requires Professional Edition)
#********************************************************************
# Common Event Email settings.
#wrapper.event.default.email.debug=TRUE
#wrapper.event.default.email.smtp.host=<SMTP_Host>
#wrapper.event.default.email.smtp.port=25
#wrapper.event.default.email.subject=[%WRAPPER_HOSTNAME%:%WRAPPER_NAME%:%WRAPPER_EVENT_NAME%] Event Notification
#wrapper.event.default.email.sender=<Sender email>
#wrapper.event.default.email.recipient=<Recipient email>
# Configure the log attached to event emails.
#wrapper.event.default.email.attach_log=TRUE
#wrapper.event.default.email.maillog.lines=50
#wrapper.event.default.email.maillog.format=LPTM
#wrapper.event.default.email.maillog.loglevel=INFO
# Enable specific event emails.
#wrapper.event.wrapper_start.email=TRUE
#wrapper.event.jvm_prelaunch.email=TRUE
#wrapper.event.jvm_start.email=TRUE
#wrapper.event.jvm_started.email=TRUE
#wrapper.event.jvm_deadlock.email=TRUE
#wrapper.event.jvm_stop.email=TRUE
#wrapper.event.jvm_stopped.email=TRUE
#wrapper.event.jvm_restart.email=TRUE
#wrapper.event.jvm_failed_invocation.email=TRUE
#wrapper.event.jvm_max_failed_invocations.email=TRUE
#wrapper.event.jvm_kill.email=TRUE
#wrapper.event.jvm_killed.email=TRUE
#wrapper.event.jvm_unexpected_exit.email=TRUE
#wrapper.event.wrapper_stop.email=TRUE
# Specify custom mail content
wrapper.event.jvm_restart.email.body=The JVM was restarted.\n\nPlease check on its status.\n
#********************************************************************
# Wrapper Windows NT/2000/XP Service Properties
#********************************************************************
# WARNING - Do not modify any of these properties when an application
# using this configuration file has been installed as a service.
# Please uninstall the service before modifying this section. The
# service can then be reinstalled.
# Name of the service
wrapper.name=testwrapper
# Display name of the service
wrapper.displayname=Test Wrapper Sample Application
# Description of the service
wrapper.description=Test Wrapper Sample Application Description
# Service dependencies. Add dependencies as needed starting from 1
wrapper.ntservice.dependency.1=
# Mode in which the service is installed. AUTO_START, DELAY_START or DEMAND_START
wrapper.ntservice.starttype=AUTO_START
# Allow the service to interact with the desktop.
wrapper.ntservice.interactive=false