為了監控程序正常運行，即當程序掛掉時，能夠自動重啟。
特配置如下：
check process pusher-admin with pidfile /var/run/admin.pid
start program = "/etc/init.d/pusherd start"
stop program = "/etc/init.d/pusherd stop"
if 5 restarts within 5 cycles then timeout
group pusherd
查看是否監控正常，運行命令如下：
[root@pusher-ECM-1-226 pusher]# monit status
The Monit daemon 5.2.5 uptime: 1m
System '127.0.0.1'
status running
monitoring status monitored
load average [0.00] [0.02] [0.05]
cpu 0.0%us 0.0%sy 0.0%wa
memory usage 1731472 kB [10.6%]
swap usage 0 kB [0.0%]
data collected Mon Mar 24 16:44:25 2014
Process 'pusher-admin'
status running
monitoring status monitored
pid 9245
parent pid 1
uptime 5m
children 6
memory kilobytes 978964
memory kilobytes total 983880
memory percent 6.0%
memory percent total 6.0%
cpu percent 0.0%
cpu percent total 0.0%
data collected Mon Mar 24 16:44:25 2014
可以看到，monit已經監控到pusher-admin應用。
注意：在配置pusherd.monit的時候，如果添加上
mode manual
，則需要在/etc/init.d/pusherd中手動去monit這個pusherd應用，即在啟動是monit上，在關閉時unmonit，代碼示例如下：
start時：
if [ -f /etc/init.d/monit ] ; then
for APPLICATION_TYPE in ${APPLICATION_TYPES}; do
/usr/bin/monit monitor "${APPLICATION_PRODUCT}-${APPLICATION_TYPE}"
done
fi
;;
stop時：
if [ -f /etc/init.d/monit ] ; then
for APPLICATION_TYPE in ${ALL_TYPES[@]}; do
/usr/bin/monit unmonitor "${APPLICATION_PRODUCT}-${APPLICATION_TYPE}"
done
fi
另注：若monit stauts顯示某一項服務為not monitored，則可以刪除/var/monit/state文件，再重啟monit即可。