zhaobin

          增強信息技術;感悟商業管理;探索商業與技術融合;豐富自我修養;享受時尚生活;記錄心路歷程;使Blog作為自我改變之記錄與監督的平臺。
          posts - 25, comments - 59, trackbacks - 0, articles - 0
            BlogJava :: 首頁 :: 新隨筆 :: 聯系 :: 聚合  :: 管理

          linux下安裝NDS 8.7.3 及打補丁 筆記

          Posted on 2010-01-23 15:11 趙斌 閱讀(2228) 評論(1)  編輯  收藏 所屬分類: 1.技術區

          linux下安裝NDS8.7.3及打補丁筆記

          nds正常端口389
          nds SSL端口636
          Consoleone端口524

          linux操作系統要安裝snmp-utils安裝包,在基本應用下

          啟動nds命令:/etc/rc.d/init.d/ndsd start

          停止NDS服務
          service ndsd stop

          /etc/init.d/ndsd stop

          刪除原有的NDS服務
          ndsconfig rm -a admin.com
          rm  Removes the server object and directory services from a tree.

          如果NDS已經不能啟動,則直接刪除/etc/nds.conf和/var/nds。

          卸載NDS的安裝
          cd /opt/software/eDir_873_linux_full/Linux/setup
          ./nds-uninstall

          手工卸載NICI
          rpm -e --nodeps nici

          手工安裝NICI,否則重新安裝NDS后NICI無法啟動。
          rpm -ivh nici-2.6.4-0.05.i386.rpm

          重新安裝NDS,注意有“NICI is installed in SERVER mode.”的信息顯示。
          ./nds-install
          輸入1,2將兩個都安裝。

          創建樹
          ndsconfig new -e -t hd-tree -n o=hdnet -a cn=admin.o=hdnet

          編輯/etc/nds.conf,增加如下一行,指定監聽的網卡
          n4u.server.interfaces=eth0@524
          相應的說明文檔:http://www.novell.com/zh-cn/documentation/ndsedir86/?taoenu/data/a7f7odr.html

          重啟NDS服務后,就可以用ConsoleOne連接了。

          停止服務,備份NDS的文件
          tar zcvf nds-bkp-20100123.tar.gz /etc/nds.conf /etc/ndsimon.conf /etc/init.d/ndsd /usr/lib/nds-modules/ndsmodules.conf /var/nds/dib

          解壓NDS的備份文件
          tar zxvf nds-bkp-20100123.tar.gz

          先恢復Schema
          ndsbackup xvf ndsschemahd20100115.bak -a admin.hdnet -p 1 schema
          如果是遠程的NDS服務器,則需要用R參數指定
          ndsbackup xRvf 192.168.130.77 ndsschemahd20100115.bak -a admin.hdnet -p 1 schema

          然后恢復innerUser和數據。注意:恢復的時候無法選擇恢復部分數據,所以,一定要在備份時指定備份部分o的數據
          ndsbackup xvf hdgov-inner.bak -a admin.hdnet -p 1
          ndsbackup xvf hdgov-hdqjg.bak  -a admin.hdnet -p 1

          修復NDS的命令,可以經常修復修復。
          ndsrepair -U -F ndsrepair.log

          打補丁,注意要先停掉服務
          cd /opt/software/edir87310_ftf2
          ./install.sh

                                             (完)
          ===============================================================================
          Error While Loading dxevent

          If DirXML is not installed, while loading dxevent, the error "Loader Failed:for
          dxevent,error ld.so.1: /usr/sbin/ndsd: fatal:
          dxevent: open failed: No such file or
          directory,errno 2" gets logged in your ndsd.log file.

          This is a warning and you can ignore it. This error will not appear once you install DirXML.
          ===============================================================================

          DirXML Fails to Start After Upgrading to eDirectory 8.7.3.x

          Upgrading to eDirectory 8.7.3.x with an existing DirXML installation will cause
          DirXML to fail on Solaris and Linux. To fix this problem, install the NDSdxevnt
          library on Solaris or the NDSdxevnt-1.1.1-1.i386.rpm package on Linux.
          These files can be found in the ./setup directory on the DirXML 1.1a installation CD.


          ===============================================================================
          eDirectory不穩的因素很多,無論什麼原因,除了抓出log之外(因為許多時候既使抓出來也看不懂)。還有幾個步驟可參考:
          1. repair TREE。許多的問題都發生在TREE本身。
          2. 確認這一臺伺服器上還有跑什麼服務。盡量單純一點。
          3. 如上面安裝IDM,確認policies寫法正確,因為不正確的policies容易造成edirectory crash (exception)。
          4. 確認伺服器的loading和網路loading有無導致edirectory負荷不了。 

          ===============================================================================



          趙斌原創,保留一切權利,轉載請保留引用:www.aygfsteel.com/zhaobin,注明轉載除外,謝謝!】

          評論

          # re: linux下安裝NDS 8.7.3 及打補丁 筆記  回復  更多評論   

          2010-01-26 16:59 by noname
          Q: NICI Initialization failed: -1497, Exiting...

          A: Note that there is a known issue with upgrading via automatic things to
          eDirectory 8.8 where NICI (upgrading to 2.7) moves the NICI files (which is
          correct) but does not place the softlink in the original location to the
          new (which is not correct). There is a TID as well. The fix it to create
          the softlink.

          ln -s /var/opt/novell/nici /var/novell/nici
          主站蜘蛛池模板: 临海市| 广州市| 昂仁县| 八宿县| 祁阳县| 龙岩市| 仲巴县| 岫岩| 蒙阴县| 灵丘县| 北海市| 察雅县| 治县。| 内乡县| 句容市| 盘锦市| 五原县| 岐山县| 常山县| 定州市| 仪陇县| 霍林郭勒市| 南陵县| 若羌县| 柳江县| 江源县| 陆河县| 会宁县| 新乡市| 湄潭县| 南木林县| 河北省| 莲花县| 梅河口市| 罗山县| 余干县| 睢宁县| 嵊州市| 博兴县| 江阴市| 台北县|