posts - 66, comments - 40, trackbacks - 0

本文將告訴你如何使用Netty2來編一個網絡應用程序(包括客戶端和服務端)。我會介紹一個簡單的SumUp協議，用來對整數求和。通過源代碼的一步步講解，你會了解到Netty2的每個特性。

SumUp 協議

SumUp服務會加總從客戶端送來的ADD消息中的所有值，并且為每個ADD消息返回一個RESULT消息。所有消息都是由header和body兩部分組成：

header包含type和sequence兩個字段。type表示消息的類型(0是RESULT消息，1是ADD消息)。sequence用來表示一組對應的ADD和RESULT(也就是說，服務器回應ADD消息時，應在RESULT中使用與ADD一樣的sequence值)。

ADD 消息

ADD消息包含了要被求和的值。

RESULT消息

RESULT具有不固定長度的消息體。當計算沒問題時，body內容是加總的值(4bytes)，如果有錯誤或溢位，則是2bytes. 見下圖：

實現MessageRecognizer

MessageRecognizer從送來的數據中重組出Message對象。這兒我們實現了一個SumUpMessageRecognizer，用于客戶端和服務端的信息重組。

public class SumUpMessageRecognizer implements MessageRecognizer {
??
?? publicstaticfinalint CLIENT_MODE = 1;
??
?? publicstaticfinalint SERVER_MODE = 2;
??
?? privateint mode;
??
?? publicSumUpMessageRecognizer(int mode) {
??? ??? switch (mode) {
??? ??????? case CLIENT_MODE:
??????? ??? ??????? case SERVER_MODE:
???? ??????????? this.mode = mode;
???? ??????????? break;
???????????????????? default:
???? ??????????? thrownew IllegalArgumentException("invalid mode: " + mode);
??? ??? }
?? }
??
?? public Message recognize(ByteBuffer buf) throws MessageParseException {
??? ??? // return null if message type is not arrived yet.
??? ??? if (buf.remaining() < Constants.TYPE_LEN)
???? ??????? returnnull;
????
??? ??? int type = buf.getShort();
??? ??? switch (mode) {
??? ?????? ?// 如果是server模式，只讓它接收ADD消息.
??? ??????? case SERVER_MODE:
???? ?????????? ?switch (type) {
???? ??????????????? case Constants.ADD:
????? ??????????????? returnnewAddMessage();
???? ??????????????? default:
????? ??????????????????? thrownew MessageParseException("unknown type: " + type);
???? ??????????? }
??? ??????? //如果是客戶端模式，只讓它接收RESULT消息.
??? ??????? case CLIENT_MODE:
???????????????????????? switch (type) {
???? ??????????????? case Constants.RESULT:
????? ??????????????????? returnnewResultMessage();
???? ??????????????? default:
????? ??????????????????????? thrownew MessageParseException("unknown type: " + type);
???? ??????????? }
??? ??????? default:
???? ??????????? thrownew InternalError(); // this cannot happen
??? ??? }
?? }
? }

實現ADD和RESULT消息

我們必須實現ADD和RESULT消息: ADD和RESULT。它們都有公共的header，最好的方式是實現一個AbstractMessage，并且從它繼承出Add和Result消息。

源代碼：

AbstractMessage.java

View Javadoc

						1
						/*

						2
						 * @(#) $Id: AbstractMessage.java 11 2005-04-18 03:42:45Z trustin $
						 */
						package 
						net.gleamynode.netty2.example.sumup;
56import java.nio.ByteBuffer;
78import net.gleamynode.netty2.Message;
9import net.gleamynode.netty2.MessageParseException;

						17
						public
						abstract
						class
						AbstractMessage implements Message {
1819privatefinalint type;
2021privateint sequence;
2223privateboolean readHeader;
2425privateboolean wroteHeader;
2627protectedAbstractMessage(int type) {
28this.type = type;
29  	}
3031publicint getSequence() {
32return sequence;
33  	}
3435publicvoid setSequence(int sequence) {
36this.sequence = sequence;
37  	}
3839publicfinalboolean read(ByteBuffer buf) throws MessageParseException {
40// read a header if not read yet.41if (!readHeader) {
42  			readHeader = readHeader(buf);
43if (!readHeader)
44return false;
45  		}
4647// Header is read, now try to read body48if (readBody(buf)) {
49// finished reading single complete message50

		readHeader = false; // reset state51returntrue;
52  		} else53return false;
54  	}
5556privateboolean readHeader(ByteBuffer buf) throws MessageParseException {
57// if header is not fully read, don't read it.58if (buf.remaining() < Constants.HEADER_LEN)
59return false;
6061// read header and validate the message62int readType = buf.getShort();
63if (type != readType)
64thrownew MessageParseException("type mismatches: " + readType
65  					+ " (expected: " + type + ')');
6667// read sequence number of the message68  		sequence = buf.getInt();
69returntrue;
70  	}
7172protectedabstractboolean readBody(ByteBuffer buf)
73  			throws MessageParseException;
7475publicboolean write(ByteBuffer buf) {
76// write a header if not written yet.77if (!wroteHeader) {
78  			wroteHeader = writeHeader(buf);
79if (!wroteHeader)
80return false; // buffer is almost full perhaps81  		}
8283// Header is written, now try to write body84if (writeBody(buf)) {
85// finished writing single complete message86  			wroteHeader = false;
87returntrue;
88  		} else {
89return false;
90  		}
91  	}
9293privateboolean writeHeader(ByteBuffer buf) {
94// check if there is enough space to write header95if (buf.remaining() < Constants.HEADER_LEN) return false;
96  		buf.putShort((short) type);
97  		buf.putInt(sequence);
98returntrue;
99  	}
100101protectedabstractboolean writeBody(ByteBuffer buf);
102 }

AddMessage.java

View Javadoc

						
						
						package 
						
								net.gleamynode.netty2.example.sumup
						
						
								5
						
						
								6
						
						import java.nio.ByteBuffer;
78import net.gleamynode.netty2.MessageParseException;
publicclassAddMessageextendsAbstractMessage {
1718privateint value;
1920publicAddMessage() {
21super(Constants.ADD);
22  	}
2324publicint getValue() {
25return value;
26  	}
2728publicvoid setValue(int value) {
29this.value = value;
30  	}
3132protectedboolean readBody(ByteBuffer buf) throws MessageParseException {
33// don't read body if it is partially readable34if (buf.remaining() < Constants.ADD_BODY_LEN) return false;
35  		value = buf.getInt();
36returntrue;
37  	}
3839protectedboolean writeBody(ByteBuffer buf) {
40// check if there is enough space to write body41if (buf.remaining() < Constants.ADD_BODY_LEN)
42return false;
4344  		buf.putInt(value);
4546returntrue;
47  	}
4849public String toString() {
50// it is a good practice to create toString() method on message classes.51return getSequence() + ":ADD(" + value + ')';
52  	}
53  }

ResultMessage.jav a?

View Javadoc

package net.gleamynode.netty2.example.sumup 5 6 import java.nio.ByteBuffer; 7 8import net.gleamynode.netty2.MessageParseException;

16 public class ResultMessage extends AbstractMessage { 17 18privateboolean ok; 19 20privateint value; 21 22privateboolean processedResultCode; 23 24publicResultMessage() { 25super(Constants.RESULT); 26 } 27 28publicboolean isOk() { 29return ok; 30 } 31 32publicvoid setOk(boolean ok) { 33this.ok = ok; 34 } 35 36publicint getValue() { 37return value; 38 } 39 40publicvoid setValue(int value) { 41this.value = value; 42 } 43 44protectedboolean readBody(ByteBuffer buf) throws MessageParseException { 45if (!processedResultCode) { 46 processedResultCode = readResultCode(buf); 47if (!processedResultCode) 48return false; 49 } 50 51if (ok) { 52if (readValue(buf)) { 53 processedResultCode = false; 54returntrue; 55 } else56return false; 57 } else { 58 processedResultCode = false; 59returntrue; 60 } 61 } 62 63privateboolean readResultCode(ByteBuffer buf) { 64if (buf.remaining() < Constants.RESULT_CODE_LEN) 65return false; 66 ok = buf.getShort() == Constants.RESULT_OK; 67returntrue; 68 } 69 70privateboolean readValue(ByteBuffer buf) { 71if (buf.remaining() < Constants.RESULT_VALUE_LEN) 72return false; 73 value = buf.getInt(); 74returntrue; 75 76 } 77 78protectedboolean writeBody(ByteBuffer buf) { 79// check if there is enough space to write body80if (buf.remaining() < Constants.RESULT_CODE_LEN 81 + Constants.RESULT_VALUE_LEN) 82return false; 83 84 buf.putShort((short) (ok ? Constants.RESULT_OK 86 : Constants.RESULT_ERROR)); 87if (ok) 88 buf.putInt(value); 89 90returntrue; 91 } 92 93public String toString() { 94if (ok) { 95return getSequence() + ":RESULT(" + value + ')'; 96 } else { 97return getSequence() + ":RESULT(ERROR)"; 98 } 99 } 100 }

This page was automatically generated by Maven

實現協議處理流程

實現了Messagerecognizer和Message之后，要實現Server和Client是非常容易的事情，通過下面的代碼，你會很容易理解如何去實現協議的處理流程。

實現Server

實現服務端兩個主要的類，一個是Server類，另一個是ServerSessionListener. Server類負責啟動主程序并監聽連接。而ServerSessionListener用于處理和發送消息。

public class Server {

privatestaticfinalint SERVER_PORT = 8080;
privatestaticfinalint DISPATCHER_THREAD_POOL_SIZE = 16;

publicstaticvoid main(String[] args) throws Throwable {
//?初始化 I/O processor?和 event dispatcher
IoProcessor ioProcessor = new IoProcessor();
ThreadPooledEventDispatcher eventDispatcher = new OrderedEventDispatcher();
?
? // 啟動缺省數量的I/O工作線程
? ioProcessor.start();
?
? // 啟動指定數量的event dispatcher?線程
? eventDispatcher.setThreadPoolSize(DISPATCHER_THREAD_POOL_SIZE);
? eventDispatcher.start();
?
? //?準備 message recognizer
? MessageRecognizer recognizer = new SumUpMessageRecognizer(
? SumUpMessageRecognizer.SERVER_MODE);
?
? // 準備session監聽器，用于處理通訊過程.
?ServerSessionListener listener = new ServerSessionListener();
?
?// 開啟server socket通道
?ServerSocketChannel ssc = ServerSocketChannel.open();
?ssc.socket().bind(new InetSocketAddress(SERVER_PORT));
?
?// 監聽連接，并開始通訊
?System.out.println("listening on port " + SERVER_PORT);
?for (;;) {
?// 接受connection
?SocketChannel channel = ssc.accept();
?
?//?建立新的session
?Session session = new Session(ioProcessor, channel, recognizer, eventDispatcher);
?
?// 添加session監聽器
?session.addSessionListener(listener);
?
?//?開始通訊
?session.start();
?}
?}
?}
?

public class ServerSessionListener implements SessionListener {

??????? public ServerSessionListener() {

??????? }

??????? public void connectionEstablished(Session session) {

?????????????? System.out.println(session.getSocketAddress() + " connected");

?????????????? //?設置空閑時間為60秒

?????????????? session.getConfig().setIdleTime(60);

?????????????? // 設置sum的初始值為0。

?????????????? session.setAttachment(new Integer(0));

??????? }

??????? public void connectionClosed(Session session) {

?????????????? System.out.println(session.getSocketAddress() + " closed");

? ?????? }

??????? // 當收到client發來的消息時，此方法被調用

? ?????? public void messageReceived(Session session, Message message) {

? ????????????? System.out.println(session.getSocketAddress() + " RCVD: " + message);

?????????????? // client端只發送AddMessage. 其它情況要另作處理

?????????????? // 在這里只是簡單的進行類型轉換處理

?????????????? AddMessage am = (AddMessage) message;

?????????????? // 將收到的消息里的值加上當前sum的值.

?????????????? int sum = ((Integer) session.getAttachment()).intValue();

?????????????? int value = am.getValue();

?????????????? long expectedSum = (long) sum + value;

?????????????? if (expectedSum > Integer.MAX_VALUE || expectedSum < Integer.MIN_VALUE) {

?????????????????????? // 如果溢位返回錯誤消息

??????? ?????????????? ResultMessage rm = newResultMessage();

??????? ?????????????? rm.setSequence(am.getSequence()); // 從送來的Add消息中得到sequence值。

?????????????????????? rm.setOk(false);

?????????????????????? session.write(rm);

?????????????? } else {

?????????????????????? //? 加總

?????????????????????? sum = (int) expectedSum;

?????????????????????? session.setAttachment(new Integer(sum));

?????????????????????? // 返回結果消息

?????????????????????? ResultMessage rm = newResultMessage();

?????????????????????? rm.setSequence(am.getSequence()); // 從送來的Add消息中得到sequence值。

?????????????????????? rm.setOk(true);

?????????????????????? rm.setValue(sum);

?????????????????????? session.write(rm);

?????????????? }

??????? }

??????? public void messageSent(Session session, Message message) {

?????????????? System.out.println(session.getSocketAddress() + " SENT: " + message);

??????? }

??????? public void sessionIdle(Session session) {

?????????????? System.out.println(session.getSocketAddress()

?????????????????????????????? + " disconnecting the idle");

?????????????? // 關閉空閑的會話。

?????????????? session.close();

??????? }

??????? // 異常發生時，將調用此方法

??????? public void exceptionCaught(Session session, Throwable cause) {

?????????????? System.out.println(Thread.currentThread().getName()

?????????????????????????????? + session.getSocketAddress() + " exception:");

? ????????????? cause.printStackTrace(System.out);

? ????????????? if (cause instanceof MessageParseException) {

? ????????????????????? //?印出錯誤信息內容，便于調試

?????????????????????? MessageParseException mpe = (MessageParseException) cause;

?????????????????????? ByteBuffer buf = mpe.getBuffer();

?????????????????????? System.out.println(buf);

?????????????????????? System.out.print("Buffer Content: ");

?????????????????????? while (buf.remaining() > 0) {

?????????????????????????????? System.out.print(buf.get() & 0xFF);

?????????????????????????????? System.out.print(' ');

?????????????????????? }

?????????????????????? System.out.println();

?????????????? }

?????????????? // 關閉會話

?????????????? session.close();

??????? }

}

服務端運行后，其輸出的內容示例如下：

listening on port 8080
/127.0.0.1:4753 connected
/127.0.0.1:4753 RCVD: 0:ADD(4)
/127.0.0.1:4753 RCVD: 1:ADD(6)
/127.0.0.1:4753 RCVD: 2:ADD(2)
/127.0.0.1:4753 RCVD: 3:ADD(7)
/127.0.0.1:4753 RCVD: 4:ADD(8)
/127.0.0.1:4753 RCVD: 5:ADD(1)
/127.0.0.1:4753 SENT: 0:RESULT(4)
/127.0.0.1:4753 SENT: 1:RESULT(10)
/127.0.0.1:4753 SENT: 2:RESULT(12)
/127.0.0.1:4753 SENT: 3:RESULT(19)
/127.0.0.1:4753 SENT: 4:RESULT(27)
/127.0.0.1:4753 SENT: 5:RESULT(28)
/127.0.0.1:4753 closed

														實現客戶端

跟服務端對應，主要由Client和ClientSessionListener組成。

public class Client {

??????? private static final String HOSTNAME = "localhost";

??????? private static final int PORT = 8080;

??????? private static final int CONNECT_TIMEOUT = 30; // seconds

??????? private static final int DISPATCHER_THREAD_POOL_SIZE = 4;

??????? public static void main(String[] args) throws Throwable {

?????????????? // 預備要加總的值。

?????????????? int[] values = newint[args.length];

?????????????? for (int i = 0; i < args.length; i++) {

?????????????????????? values[i] = Integer.parseInt(args[i]);

?????????????? }

?????????????? // 初始化 I/O processor 和 event dispatcher

?????????????? IoProcessor ioProcessor = new IoProcessor();

?????????????? ThreadPooledEventDispatcher eventDispatcher = new OrderedEventDispatcher();

?????????????? // 開始缺省數量的I/O工作線程

?????????????? ioProcessor.start();

?????????????? // 啟動指定數量的event dispatcher線程

??????? eventDispatcher.setThreadPoolSize(DISPATCHER_THREAD_POOL_SIZE

?????????????? eventDispatcher.start();

?????????????? // 準備 message recognizer

?????????????? MessageRecognizer recognizer = new SumUpMessageRecognizer(

?????????????????????????????? SumUpMessageRecognizer.CLIENT_MODE);

?????????????? // 準備客戶端會話。

?????????????? Session session = new Session(ioProcessor, new InetSocketAddress(

?????????????????????????????? HOSTNAME, PORT), recognizer, eventDispatcher);

??????????????

?????????????? session.getConfig().setConnectTimeout(CONNECT_TIMEOUT);

??????????????

?????????????? // 開始會話，并使用ClientSessionListener監聽。

?????????????? ClientSessionListener listener = new ClientSessionListener(values);

?????????????? session.addSessionListener(listener);

?????????????? session.start();

??????????????

?????????????? // 一直等到加總完成

?????????????? while ( !listener.isComplete() ) {

?????????????????????? Thread.sleep(1000);

?????????????? }

??????????????

?????????????? // 停止 I/O processor 和 event dispatcher

?????????????? eventDispatcher.stop();

?????????????? ioProcessor.stop();

? ?????? }

public class ClientSessionListener implements SessionListener {

? ?????? private final int[] values;

? ?????? private boolean complete;

? ?????? public ClientSessionListener(int[] values) {

? ????????????? this.values = values;

? ?????? }

? ??????

? ?????? public boolean isComplete() {

? ????????????? return complete;

? ?????? }

??????? // 當連接建立好后會調用此方法。

? ?????? public void connectionEstablished(Session session) {

? ????????????? System.out.println("connected to " + session.getSocketAddress());

? ????????????? // 發送加總請求。

? ????????????? for (int i = 0; i < values.length; i++) {

? ????????????????????? AddMessage m = new AddMessage();

? ????????????????????? m.setSequence(i);

? ????????????????????? m.setValue(values[i]);

? ????????????????????? session.write(m);

? ????????????? }

? ?????? }

? ?????? public void connectionClosed(Session session) {

? ????????????? System.out.println("disconnected from " + session.getSocketAddress());

??????? }

??????? // 當收到server的回應信息時，會調用此方法

??????? public void messageReceived(Session session, Message message) {

?????????????? System.out.println("RCVD: " + message);

?????????????? // 服務端只發送ResultMessage. 其它情況下

? ????????????? // 要通過instanceOf來判斷它的類型.

? ????????????? ResultMessage rm = (ResultMessage) message;

? ????????????? if (rm.isOk()) {

? ????????????????????? // 如果ResultMessage是OK的.

? ????????????????????? // 根據ResultMessage的sequence值來判斷如果,

? ????????????????????? // 一次消息的sequence值，則

? ????????????????????? if (rm.getSequence() == values.length - 1) {

? ????????????????????????????? // 打印出結果.

? ????????????????????????????? System.out.println("The sum: " + rm.getValue());
???????????????????????????????// 關閉會話

?????????????????????????????? session.close();

?????????????????????????????? complete = true;

?????????????????????? }

?????????????? } else {

?????????????????????? //?如有錯誤，則打印錯誤信息，并結束會話.

? ????????????????????? System.out.println("server error, disconnecting...");

?????????????????????? session.close();

?????????????????????? complete = true;

?????????????? }

??????? }

??????? public void messageSent(Session session, Message message) {

?????????????? System.out.println("SENT: " + message);

??????? }

??????? public void sessionIdle(Session session) {

??????????????

??????? }

??????? public void exceptionCaught(Session session, Throwable cause) {

?????????????? cause.printStackTrace(System.out);

?????????????? if (cause instanceof ConnectException) {

?????????????????????? // 如果連接server失敗, 則間隔5秒重試連接.

? ????????????????????? System.out.println("sleeping...");

? ????????????????????? try {

? ????????????????????????????? Thread.sleep(5000);

? ????????????????????? } catch (InterruptedException e) {

? ????????????????????? }

? ?????????????????????

? ????????????????????? System.out.println("reconnecting... " + session.getSocketAddress());

? ????????????????????? session.start();

? ????????????? } else {

? ????????????????????? session.close();

? ????????????? }

? ?????? }

通過上面的例子，你也許會發現實現一個自定義的協議原來如此簡單。你如果用Netty試著去實現自己的smtp或pop協議，我想也不會是一件難事了。

Netty2的首頁在http://gleamynode.net/dev/projects/netty2/index.html，你可以在這找到本文的全部源碼。

posted on 2006-06-20 19:45 happytian 閱讀(372) 評論(0) 編輯收藏

新用戶注冊 刷新評論列表


只有注冊用戶登錄后才能發表評論。




網站導航: 博客園 IT新聞 Chat2DB C++博客博問管理

2025年7月

日

一

二

三

四

五

六

Welcome here, my friend!

常用鏈接

留言簿(12)

隨筆檔案(66)

文章分類

人生

文章檔案(63)

web

Ajax forum
java.csdn
javafan
Mrs Hu's blog
sohu

常用鏈接

留言簿(12)

隨筆檔案(66)

文章分類

文章檔案(63)

web

最新隨筆

搜索

積分與排名

最新評論

閱讀排行榜

評論排行榜