posts - 165, comments - 198, trackbacks - 0, articles - 1
            BlogJava :: 首頁 :: 新隨筆 :: 聯系 :: 聚合  :: 管理

          2008年9月23日


          學習就從官方的測試開始,但不知道怎么回事官方的測試有問題,這我就把我配置的簡單junit環境共享給大家把!
          1.下載 hibernate-annotations-3.4.0.GA 并解壓 ,cd 到解壓后目錄下
          2. $>ant junit (天知道,怎么官方出的東西測試不能通過!!)
          ?? 不要急,我們來看錯誤 (錯誤提示有刪減)
          ???? 錯誤-1:$>build.xml:95: ./jdbc not found.
          ???? 解決辦法-1: $>mkdir ./jdbc
          3.? $>ant junit
          ???? 錯誤-2:?
          ????? ./build.xml:124: The following error occurred while executing this line:
          ????? ./build.xml:126: The following error occurred while executing this line:
          ????? ./common-build.xml:349: .\src\filters\hsqldb.filter as it doesn't exist.
          ???? 解決辦法-2:
          ?????? $>mkdir? ./src/filters ;
          ?????? $>echo "" > ./src/filters/hsqldb.filter;
          4. ? $>ant junit
          ???? 錯誤-3:
          ?????? ./build.xml:124: The following error occurred while executing this line:
          ?????? ./build.xml:126: The following error occurred while executing this line:
          ?????? ./common-build.xml:351: .\src\test-resources not found.
          ????? $>mkdir? ./src/test-resources ;
          5. ? $>ant junit
          ???? 錯誤-4:沒有ant 錯誤了!,但測試都為錯誤,那我們就看看 第一個測試吧,找下原因!
          ???????? test-resources:
          ????????? [mkdir] Created dir: hibernate-anntations-3.4.0.GA\build\test-reports\hsqldb
          ????????? [echo] Running against db: hsqldb
          ????????? [junit] Running org.hibernate.test.annotations.ConfigurationTest
          ????????? [junit] Tests run: 7, Failures: 0, Errors: 6, Time elapsed: 1.218 sec
          ????????? .............
          ???? $>find . -name "ConfigurationTest.java"? #pwd /hibernate-anntations-3.4.0.GA
          ??????? ./test/org/hibernate/test/annotations/configuration/ConfigurationTest.java
          ??????? ./test/org/hibernate/test/annotations/ConfigurationTest.java
          ????? 根據路徑 org.hibernate.test.annotations.ConfigurationTest
          ????? gvim? ./test/org/hibernate/test/annotations/ConfigurationTest.java
          ????? 發現第20行: cfg.configure( "org/hibernate/test/annotations/hibernate.cfg.xml" );
          ????? 感覺應該沒有配置 jdbc
          ????? gvim ./test/org/hibernate/test/annotations/hibernate.cfg.xml? #果然 沒配置
          ????? 我這就放個我的簡單配置上來(使用 hbm hsqldb 內存數據庫測 試 ):
          <!DOCTYPE?hibernate-configuration?PUBLIC
          ????????"-//Hibernate/Hibernate?Configuration?DTD?3.0//EN"
          ????????"http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd"
          >
          <hibernate-configuration>
          ??
          <session-factory>
          ????????
          <property?name="hibernate.dialect">org.hibernate.dialect.HSQLDialect</property>
          ????????
          <property?name="connection.driver_class">org.hsqldb.jdbcDriver</property>
          ????????
          <property?name="connection.url">jdbc:hsqldb:mem:hbn_ann</property>
          ????????
          <property?name="connection.username">sa</property>
          ????????
          <property?name="connection.password"></property>
          ???
          ????????
          <mapping?resource="org/hibernate/test/annotations/Boat.hbm.xml"/>
          ????????
          <mapping?package="org.hibernate.test.annotations"/>
          ????????
          <mapping?class="org.hibernate.test.annotations.Plane"/>
          ??
          </session-factory>
          </hibernate-configuration>


          ????? 我這就是要hsqldb吧,既然上面錯誤1有 jdbc 文件夾,那就是放 jdbc jar 的地方
          ????? $> cp ../hsqldb.jar? ./jdbc
          ???
          6. ? $>ant junit
          ???? 呵呵 測試 第一個正確了 ! (目前配置后,測試環境并不是全部都正確,比如第2個測試)
          ???? 其他測試錯誤日志在??? .\build\test-reports\hsqldb ...
          ???? 比如第2個錯誤 異常部分
          ????? org.hibernate.HibernateException: The dialect was not set. Set the property hibernate.dialect.
          ??? at org.hibernate.dialect.Dialect.instantiateDialect(Dialect.java:256)
          ??? at org.hibernate.dialect.Dialect.getDialect(Dialect.java:234)
          ??????? ........ 大家一邊學習,一邊配置測試 環境吧。
          ??? 錯誤日記 都會在 build\test-reports\hsqldb下

          posted @ 2009-04-14 11:30 G_G 閱讀(1677) | 評論 (0)編輯 收藏


          參考:
          http://tech.ddvip.com/2008-12/122835390597191.html


          頁面可以直接運行:
          <html>
          <head>

          <style?type="text/css">

          .box1
          {
          float
          :left;
          width
          :21px;
          height
          :21px;
          position
          :relative;
          background
          :?#F3F2E2?url(http://mp3.youdao.com/images/mbox_bg.gif)?no-repeat;
          }
          .box1?
          {
          background-position
          :?0px?-60px;
          }


          </style>

          </head>

          <body>

          ????
          <div?class="box1"?
          ????????onmouseover
          ="this.style.backgroundPosition='0px?-81px'?"?
          ????????onmouseout
          ="this.style.backgroundPosition='0px?-102px'?"????
          ????
          >
          ????
          </div>

          </body>

          </html>

          posted @ 2009-02-24 16:46 G_G 閱讀(1996) | 評論 (0)編輯 收藏

          javascript 學習
          ?? ? ? javascript 大體上可分為3個不同部分組成: 核心(ECMAscript),文本對象(DOM),瀏覽器對象(BOM)
            1. ?核心(ECMAscript): 關鍵字,語句,運算符,對象
            2. 文本對象(DOM):DOM將把整個頁面規劃成由節點層級構成的文檔.
              1. 解析遵循 W3C html dom 標準
              2. ? W3C dom 參考特別關注 DOM Node 說明???
            3. BOM 瀏覽器對象.? cookie,彈出新瀏覽器,瀏覽器設置大小
          ?
          核心(ECMAscript)Global 內置對象;
          ????? 方法: parseInt(),isNan(),encodeURI()...等都為此對象方法
          ????? 特別注意 eval();動態語言的象征 比如:eval("alert('hi')"); 但這個方法很邪惡(安全方面)
          文本對象(DOM)說明:
          ?? ??? ?
          <bookstore>
          <book category="cooking">
          <title lang="en">Everyday Italian</title>
          <author>Giada De Laurentiis</author>
          <year>2005</year>
          <price>30.00</price>
          </book>
          </bookstore>

          DOM node tree

          Node tree

          ?? ??? ??? ???


          ??? ?

          ? 1. ECMAscript基礎

          ?????? $ 變量弱類型 ; ??? 匈牙利類型標示 : var iOuouValue=100;?

          ?????? $ 結束行分號有無都可以; ??? 但再 onsubmit="javascript:function();return false;"

          ?????? $ 關鍵字 ; 提別注意

          ??????????????? "constructor" bean.constructor

          ???????????????????? //print bean function(){

          ????????????????????????? ....

          ????????????????????? }

          ??????????????? "typeof" ? var test=1; alert(typeof testX); //output "undefined"

          ??????????????? "NaN" - not a number ->? isNan("blue"); //output "true" ? ->isNan("123"); //output "false"?

          ?????? $ 對象; var o = new Object(); var a = {}?

          ?? ??? ??? ??? ?這里特別說明下 我們普通寫的 一個 function 就是一個 object?

          ?? ??? ??? ?? 這?? var a = {name:"劉凱毅"} 等同與 var a = function(){this.name="劉凱毅"};

          ?? ??? ??? ??? ???? 來個 {name:"test",pass:"123456",addr:"bj"} //這是什么 ?! json

          ?? ??? ??? ???????? 當 var str = '{name:"test",pass:"123456",addr:"bj"}'

          ?? ??? ??? ??? ???? var objectBean = eval(str); //這里就是 對象 objectBea.name 使用了

          ? 域概念:

          <SCRIPT type=text/javascript>
          var sMessage = 'Hello';
          function setSomething() {
          ? sColor = 'red';
          ? sMessage = 'Hello World!';
          }
          setSomething();
          alert(sMessage); //Hello World!
          alert(sColor); //red
          </SCRIPT>
          <SCRIPT type=text/javascript>
          var sMessage = 'Hello';
          function setSomething() {
          ? var sColor = 'red';
          ? sMessage = 'Hello World!';
          }
          setSomething();
          alert(sMessage); //Hello World!
          alert(sColor); // 什么都沒有
          </SCRIPT>

          <SCRIPT type=text/javascript>
          var sMessage = 'Hello';
          function setSomething() {
          ? var sColor = 'red';
          ? var sMessage = 'Hello World!';
          }
          setSomething();
          alert(sMessage); //Hello
          alert(sColor); // 什么都沒有
          </SCRIPT>

          ??????????

          為面向對象做基礎:object prototype 類型的對象應用。參考

          // 最簡單的 繼承
          Object.prototype.inObj?=?1;

          function?A()
          {
          ????this.inA?=?2;
          }
          ?
          A.prototype.inAProto?=?3;
          ?
          B.prototype?=?new?A;????????????//?Hook?up?A?into?B's?prototype?chain
          B.prototype.constructor?=?B;
          function?B()
          {
          ????this.inB?=?4;
          }
          ?
          B.prototype.inBProto?=?5;
          ?
          x?=?new?B;
          document.write(x.inObj?+?',?'?+?x.inA?+?',?'?+?x.inAProto?+?',?'?+?x.inB?+?',?'?+?x.inBProto);

          //1, 2, 3, 4, 5
          //增加點信心 http://www.json.org/json.js
          Object.prototype.toJSONString = function (filter) {
          return JSON.stringify(this, filter);
          };
          后我們就可以使用 bean.toJSONString()不是嗎?

          ??? $ arguments ;

          ???????? function getFun(){alert(arguments.length);}?? ;

          ?

          ?? ??? ??? ??? ?getFun("xx") //output 1

          ?? ??? ??? ??? ?getFun("xx",23) //output 2



          ?? $ 語句 ;特殊說明下 for?

          ?????????? for(var i=0i<iCount;i++)?? 或 for( attr in object ) ;

          ?????????? 如果無聊 你可以 for( sProp in window ){alert(sProp+"你丫點啊!");} //看看 javascript 的反射

          ??????????????

          ? ? ? ? ? ? ? ??

          ???


          面向對象:

          ? var bean = new Bean();

          ??

          ? 1.工廠方法

          ??????? ??? function getAttr(){

          ???? ?? ??? ???? alert(this.attr)

          ??????????? }

          ??????????? function Bean(tattr){

          ?? ??? ??? ???? var bean = new Object;

          ?? ??? ??? ?????bean.attr = tattr;

          ?? ??? ??? ?????bean.getAttr = getAttr;

          ?? ??? ??? ???? return bean ;

          ??????????? }

          ?? ???? 根本就是山寨版 面向對象

          ? 2.構造

          ????? ??? function Bean(tattr){

          ?? ??? ?????? this.attr = tattr ;

          ?? ??? ??? ?? bean.getAttr = function(){

          ?? ??? ??? ?????alert(this.attr);

          ?? ??? ??? ? ?} ? ?

          ?? ??? ???}

          ?? 其上 2 總 再Bean 對象創建時,方法會 “重復生成函數”!


          ? 3.原型模式

          ??? function Bean(){}

          ??? Bean.prototype.attr = "";

          ??? Bean.prototype.getAttr=function(){alert(this.attr);}

          ?? ?

          ?? 解決 “重復生成函數” 問題,但新的問題 Bean.prototype.getArray = new Array();


          ?? 其 new 對象 bean1 和 bean2 都會共享 new Array 空間(是我們不想看到的)


          ? 4.混合 模型 :)? 哈哈

          ???? function Bean(){

          ?? ??? ?this.attr= "";

          ?? ??? ?this.getArray=new Array;

          ?? ?}

          ?? ?Bean.prototype.getAttr=function(){alert(this.attr);}

          ?

          ? 5.動態原型 (注意下面開始,就是真正的面向對象!!!)

          ?? ??? function Bean(){

          ?? ???? this.attr= "";
          ?? ??? ?this.getArray=new Array;

          ?? ???? //classload 加載 時

          ?? ???? if(typeof Bean._initialized == "undefined" ){

          ?? ??? ???? Bean.prototype.getAttr=function(){alert(this.attr);};

          ?? ???? ??? Bean._initialized= true ;

          ?? ??? ?}

          ???? }

          ???

          /****************************************************************/

          對象繼承

          ? 1.對象冒充!!(可支持多繼承,山寨很強大)

          ????? function classA(sstr){

          ?? ???? this.color = sstr ;

          ?? ???? this.sayColor = function(){

          ?? ??? ???? alert(this.color);

          ?? ??? ?};

          ?? ???}

          ?? ?? function classC(){}

          ?? ??? function classB(){

          ?? ??? ???? this.newMethod =ClassA ;

          ?? ??? ???? this.newMethod();

          ?? ??? ???? delete this.newMethod ;


          ?? ??? ???? this.newMethod =ClassC ;

          ?? ??? ???? this.newMethod();

          ?? ??? ???? delete this.newMethod ;

          ?? ??? ????

          ?? ??? ???? this.arrt = "google";

          ?? ??? ?}

          ?? ?

          ? 2.call() apply() 也山寨,

          ????? function classA(sstr){

          ?? ???? this.color = sstr ;

          ?? ???? this.sayColor = function(str){

          ?? ??? ???? alert(str+this.color);

          ?? ??? ?};

          ?? ???}

          ?? ??? function classB(){

          ?? ??? ??? // this.newMethod =ClassA ;

          ?? ??? ??? // this.newMethod();

          ?? ??? ??? // delete this.newMethod ;

          ?? ??? ???? classA.call(this,"red");

          ?? ??? ???? //classA.apply(this,new Array("red"))

          ?? ??? ???? this.arrt = "baidu";

          ?? ??? }


          3.正統的繼承 原型鏈 (但不支持多繼承)
          ??? function classA(){this.oo="test";}
          ??? classA.prototype.color = "red";
          ??? function classB(){}
          ??? classB.prototype = new classA ;
          ??? classB.prototype.sayName = function(){
          ?? ???? alert( this.color );
          ?? ?}
          ?? ?
          var bb = new classB ;
          ?? ?bb.sayName();
          // output red
          ?? ?
          alert(bb.oo); // output test

          ?? ?alert( bb instanceof classA); //output true
          ?? ?alert( bb instanceof classB); //output? true

          4.如果你要多繼承!!并且還支持 instanceof
          ?? ???? 混合方式:
          ?? ???? function classA(){}
          ?? ???? function classB(){}
          ?? ???? function classC(){
          ?? ??? ???? classA.call(this);
          ?? ??? ???? classC.call(this);
          ?? ??? ?}
          ?? ???? classC.prototype = new classA ;//注意 這
          instanceof 只能對 A有用

          ?? ??? ?






          ???

          posted @ 2009-02-12 11:56 G_G 閱讀(1843) | 評論 (2)編輯 收藏



          下載:flash-plugin-10.0.15.3-release.i386.rpm

          ?rpm -ivh flash-plugin-10.0.15.3-release.i386.rpm

          posted @ 2009-01-12 23:39 G_G 閱讀(747) | 評論 (0)編輯 收藏


          tomcat > server.xml

          ????? <Host name="localhost" appBase="webapps"
          ?????? unpackWARs="true" autoDeploy="true"
          ?????? xmlValidation="false" xmlNamespaceAware="false">

          ? <Context docBase="D:/workspace/meganotes/mn_mod_admin/target/mn_mod_admin/" path="/"? />

          。。。。


          關鍵:在Context上不要加reloadable和debug屬性
          ?然后 使用eclipse tomcat 調試
          ok

          posted @ 2008-12-26 17:52 G_G 閱讀(536) | 評論 (0)編輯 收藏


          <? xml?version="1.0"?encoding="UTF-8" ?>
          < project? name ="ssh" >
          ????
          < property? file ="ssh.properties" ? />
          ????
          < tstamp >
          ????????
          < format? property ="TODAY" ?pattern ="yyyyMMddHHmm" ? />
          ????
          </ tstamp >
          ????
          < property? name ="ssh.path" ?value ="/data/meganotes/shell/" ? />


          ????
          < target? name ="shell/?文件?上載/覆蓋" >
          ????????
          < input? addproperty ="scp_coverage_shell_file"
          ????????????message
          ="輸入(ssh/?下文件名?\n\r?上載或覆蓋?到服務器?218?${ssh.path}?):" >
          ????????
          </ input >
          ????????
          < input
          ????????????
          message ="請確定是否使用?ssh/${scp_coverage_shell_file}?覆蓋服務器中?${ssh.host}:${ssh.path}${scp_coverage_shell_file}?(y,n)"
          ????????????validargs
          ="y,n" ?addproperty ="do.coverage" ?defaultvalue ="n" ? />
          ????????
          < condition? property ="do.abort" >
          ????????????
          < equals? arg1 ="n" ?arg2 ="${do.coverage}" ? />
          ????????
          </ condition >
          ????????
          < fail? if ="do.abort" > 退出 </ fail >

          ????????
          < sshexec? host ="${ssh.host}" ?username ="${ssh.myName}"
          ????????????password
          ="${ssh.myPass}" ?trust ="true"
          ????????????command
          ="
          ????????????????????mkdir?-p?${ssh.path}backup/${TODAY}?;
          ????????????????????if?[?-f?${ssh.path}${scp_coverage_shell_file}???]?;
          ????????????????????then??
          ????????????????????????cp?${ssh.path}${scp_coverage_shell_file}?${ssh.path}backup/${TODAY}/?;
          ????????????????????fi?;
          ????????"
          >
          ????????
          </ sshexec >
          ????????
          < scp? file ="ssh/${scp_coverage_shell_file}"
          ????????????todir
          ="${ssh.myName}:${ssh.myPass}@${ssh.host}:${ssh.path}"
          ????????????trust
          ="true" ?verbose ="true" ? />

          ????????
          < sshexec? host ="${ssh.host}" ?username ="${ssh.myName}"
          ????????????password
          ="${ssh.myPass}" ?trust ="true"
          ????????????command
          ="chmod?777?${ssh.path}${scp_coverage_shell_file}" >
          ????????
          </ sshexec >
          ????
          </ target >

          ????
          < target? name ="shell/?文件查看" >
          ????????
          < input? addproperty ="show_shell_file" ?message ="輸入查看文件名(*sh):"
          ????????????defaultvalue
          ="*" >
          ????????
          </ input >
          ????????
          < sshexec? host ="${ssh.host}" ?username ="${ssh.myName}"
          ????????????password
          ="${ssh.myPass}" ?trust ="true"
          ????????????command
          ="ls??/data/meganotes/shell/${show_shell_file}" >
          ????????
          </ sshexec >
          ????
          </ target >

          ????
          < target? name ="shell/?文件拷貝" >
          ????????
          < input? addproperty ="scp_shell_file"
          ????????????message
          ="輸入?/data/meganotes/shell/?下需要文件名(cp?到?ssh?下):" >
          ????????
          </ input >
          ????????
          < scp
          ????????????
          file ="${ssh.myName}:${ssh.myPass}@${ssh.host}:/data/meganotes/shell/${scp_shell_file}"
          ????????????todir
          ="ssh" ?trust ="true" ?verbose ="true" ? />
          ????
          </ target >



          ????
          < target? name ="admin-mvn組合操作" >
          ????????
          < exec? executable ="cmd" >
          ????????????
          < arg? value ="/c" ? />
          ????????????
          < arg? value ="${basedir}/sh/mvn/meganotes_mvn_clear.bat" ? />
          ????????
          </ exec >
          ????????
          < exec? executable ="cmd" >
          ????????????
          < arg? value ="/c" ? />
          ????????????
          < arg? value ="${basedir}/sh/mvn/meganotes_mvn_install.bat" ? />
          ????????
          </ exec >
          ????????
          < exec? executable ="cmd" >
          ????????????
          < arg? value ="/c" ? />
          ????????????
          < arg? value ="${basedir}/sh/mvn/mn_mod_admin_mvn_intall.bat" ? />
          ????????
          </ exec >
          ????
          </ target >


          ????
          < target? name ="admin-tomcat日志" >
          ????????
          < sshexec? host ="${ssh.host}" ?username ="${ssh.myName}"
          ????????????password
          ="${ssh.myPass}" ?trust ="true" ?command ="${ssh.adminRunLog}" >
          ????????
          </ sshexec >
          ????
          </ target >

          ????
          < target? name ="schedule-tomcat日志" >
          ????????
          < sshexec? host ="${ssh.host}" ?username ="${ssh.myName}"
          ????????????password
          ="${ssh.myPass}" ?trust ="true"
          ????????????command
          ="${ssh.scheduleRunLog}" >
          ????????
          </ sshexec >
          ????
          </ target >
          ????
          < target? name ="查找2008/下Mp3沒轉128-64文件夾" >
          ????????
          < sshexec? host ="${ssh.host}" ?username ="${ssh.myName}"
          ????????????password
          ="${ssh.myPass}" ?trust ="true" ?command ="${ssh.64k}" >
          ????????
          </ sshexec >
          ????????
          < sshexec? host ="${ssh.host}" ?username ="${ssh.myName}"
          ????????????password
          ="${ssh.myPass}" ?trust ="true" ?command ="${ssh.128k}" >
          ????????
          </ sshexec >
          ????????
          < sshexec? host ="${ssh.host}" ?username ="${ssh.myName}"
          ????????????password
          ="${ssh.myPass}" ?trust ="true"
          ????????????command
          ="${ssh.128kto64k.err}" >
          ????????
          </ sshexec >
          ????
          </ target >

          ????
          < target? name ="admin模塊測試" >
          ????????
          < input? addproperty ="admin_test_input"
          ????????????message
          ="測試類輸入(Video*Test):" ?defaultvalue ="*Test" >
          ????????
          </ input >
          ????????
          < echo? message ="${admin_test_input}" ></ echo >
          ????????
          < exec? executable ="cmd" >
          ????????????
          < arg? value ="/c" ? />
          ????????????
          < arg
          ????????????????
          value ="${basedir}/sh/admin_test.bat?${admin_test_input}?" ? />
          ????????
          </ exec >
          ????
          </ target >
          </ project >

          posted @ 2008-12-24 16:24 G_G 閱讀(6392) | 評論 (3)編輯 收藏





          ???? public ? static ? void ?main(String[]?args)? {
          ????????
          try ? {
          ????????
          ?????????String?charset?
          = ? " UTF-8 " ;
          ?????????String?outfile?
          = ? " d:\\category.20081218.gz " ;
          ?????????BufferedReader?in?
          = ? new ?BufferedReader(
          ??????????
          new ?InputStreamReader(
          ??????????
          new ?FileInputStream( " d:\\category.20081218 " ),
          ??????????charset));
          ??????????
          ??????????BufferedOutputStream?out?
          =
          ????????????
          new ?BufferedOutputStream(
          ??????????????
          new ?GZIPOutputStream(
          ????????????????
          new ?FileOutputStream(outfile)));
          ??????????
          ??????????
          ??????????System.out.println(
          " Writing?file " );
          ??????????String?c;
          ??????????
          while ((c? = ?in.readLine()) != null )
          ????????????out.write(?(c
          + " \n " ).getBytes(charset));
          ??????????in.close();
          ??????????out.close();
          ??????????System.out.println(
          " Reading?file " );
          ??????????BufferedReader?in2?
          =
          ????????????
          new ?BufferedReader(
          ??????????????
          new ?InputStreamReader(
          ????????????????
          new ?GZIPInputStream(
          ??????????????????
          new ?FileInputStream(outfile)
          ??????????????????),charset
          ????????????????)
          ??????????????);
          ??????????String?s;
          ??????????
          while ((s? = ?in2.readLine())? != ? null )
          ????????????System.out.println(s);
          ????????}
          ? catch (Exception?e)? {
          ??????????e.printStackTrace();
          ????????}

          ??????}


          posted @ 2008-12-22 14:35 G_G 閱讀(3623) | 評論 (0)編輯 收藏



          官方上下
          http://bassistance.de/jquery-plugins/jquery-plugin-autocomplete/

          $.補全中文? 修改
          ??? jquery.autocomplete.js 中
          ??? $input.bind(($.browser.opera ? "keypress" : "keydown")
          ??? 改為
          ??? $input.bind(($.browser.opera ? "keypress" : "keyup")
          ????
          $. 在 localdata.js 》》 var cities = [..?
          ?? 中放些 中文 測試吧


          測試頁面 ,最簡單的使用頁面 。(應該算是最簡單補全測試了)
          <script?type="text/javascript"?src="../lib/jquery.js"></script>
          <script?type='text/javascript'?src='../jquery.autocomplete.js'></script>

          <link?rel="stylesheet"?type="text/css"?href="../jquery.autocomplete.css"?/>
          <script?type="text/javascript">
          $().ready(
          function()?{
          ????$(
          "#suggest1").autocomplete([
          ????
          "test1",
          ????
          "test2",
          ????
          "測試1",
          ???????
          "測試2"
          ????]);
          });
          </script>

          <input?type="text"?id="suggest1"?/>



          使用json

          <script?type="text/javascript"?src="../lib/jquery.js"></script>
          <script?type='text/javascript'?src='../jquery.autocomplete.js'></script>

          <script?type='text/javascript'?src='localdata.js'></script>
          <link?rel="stylesheet"?type="text/css"?href="../jquery.autocomplete.css"?/>
          <script?type="text/javascript">
          var?emails?=?[
          ????{?name:?
          "Peter?Pan",?to:?"peter@pan.de"?},
          ????{?name:?
          "Molly",?to:?"molly@yahoo.com"?},
          ????{?name:?
          "Forneria?Marconi",?to:?"live@japan.jp"?},
          ????{?name:?
          "Master?<em>Sync</em>",?to:?"205bw@samsung.com"?},
          ????{?name:?
          "Dr.?<strong>Tech</strong>?de?Log",?to:?"g15@logitech.com"?},
          ????{?name:?
          "Don?Corleone",?to:?"don@vegas.com"?},
          ????{?name:?
          "Mc?Chick",?to:?"info@donalds.org"?},
          ????{?name:?
          "Donnie?Darko",?to:?"dd@timeshift.info"?},
          ????{?name:?
          "Quake?The?Net",?to:?"webmaster@quakenet.org"?},
          ????{?name:?
          "Dr.?Write",?to:?"write@writable.com"?}
          ]


          $().ready(
          function()?{
          ????????$(
          "#suggest13").autocomplete(emails,?{
          ????????
          //補全中選擇顯示
          ????????formatItem:?function(row,?i,?max)?{
          ????????????
          return?i?+?"/"?+?max?+?":?\""?+?row.name?+?"\"?["?+?row.to?+?"]";
          ????????????},
          ????????
          //補全匹配格式
          ????????formatMatch:?function(row,?i,?max)?{
          ????????????
          return?row.name?;
          ????????????},
          ????????
          //補全選定后顯示
          ????????formatResult:?function(row)?{
          ????????????
          return?row.to;
          ????????}
          ????})
          });
          </script>




          posted @ 2008-12-13 09:41 G_G 閱讀(1115) | 評論 (1)編輯 收藏

          不要為 拼寫 ajax url 而郁悶了。希望能對大家有幫助。

          /*?
          ??? 1.form?ajax?使用:
          ????eG:
          form就是普通的 html form
          ????????<input?type="button"?value="xx"?onclick="formAjax('data.jsp',this.form,ajaxReturn)"/>
          ????????function?ajaxReturn(data){
          ????????????document.getElementById("div1").innerHTML?=??data?;
          ????????}
          ??
          ????
          ??? 2.ajax?使用???:
          ????AjaxFunction
          ????????AjaxFunction('url?param=tt&param2=te',function(text){??
          ????????????alert(text);
          ????????});

          ??? 3.迭代器:

          ??? recursiveNodes(array,dom,pushFun,layer)
          ? ? ?? array 迭代寄存器
          ? ? ?? dom 被迭代對象
          ?????? pushFun 自定義收集方法
          ??????????? pushFun(array,node,layer)
          ?????????????? node 迭代中對象
          ?????? layer 深度
          ??? EG:
          ??? var arr = [] ;
          ??? recursiveNodes(
          arr ,dom,function(array,node,layer){
          ??????????? arr.push(node);
          ???? },2)
          ;


          ? ? ???
          ?*/
          var?_request;
          try?{
          ????
          this._request?=?new?XMLHttpRequest();
          }?
          catch?(e)?{
          ????
          try?{
          ????????
          this._request?=?new?ActiveXObject('Msxml2.XMLHTTP');
          ????}?
          catch?(e)?{
          ????????
          try?{
          ????????????
          this._request?=?new?ActiveXObject('Microsoft.XMLHTTP');
          ????????}?
          catch?(e)?{
          ????????????request?
          =?false;
          ????????}
          ????}
          }

          var?AjaxFunction?=?function(urls,?getAjaxText)?{
          ????AjaxFunction._getAjaxText?
          =?null;

          ????_url?
          =?'';
          ????_params?
          =?'';

          ????AjaxFunction._getAjaxText?
          =?getAjaxText;
          ????
          var?strs?=?urls.split(/\?/);
          ????_url?
          =?strs[0];
          ????
          if?(strs.length?>?1)
          ????????_params?
          =?strs[1];

          ????_request.open(
          "POST",?this._url,?true);
          ????_request.setRequestHeader(
          "Cache-Control",?"no-cache");
          ????_request.setRequestHeader(
          "content-type",
          ????????????
          "application/x-www-form-urlencoded");
          ????_request.send(_params);
          ????_request.onreadystatechange?
          =?_onComplete;
          };
          function?_onComplete()?{
          ????
          if?(_request.readyState?==?4)?{
          ????????
          if?(_request.status?==?200?||?_request.status?==?0)?{
          ????????????
          if?(_request.responseText?!=?null?&&?_request.responseText?!=?''
          ????????????????????
          &&?_request.responseText?!=?'?')
          ????????????????AjaxFunction._getAjaxText(_request.responseText);
          ????????}
          ????}
          }

          /*
          ?*?迭代?1.?array,dom?2.?array,dom,layer
          ?
          */
          function?recursiveNodes(array,?dom,?pushFun,?layer)?{
          ????
          if?(layer?==?0)
          ????????
          return;
          ????
          if?(layer?>?0)?{
          ????????
          --layer;
          ????????
          if?(dom.hasChildNodes?&&?dom.hasChildNodes())?{
          ????????????
          for?(?var?i?=?0;?i?<?dom.childNodes.length;?i++)?{
          ????????????????
          var?nodeT?=?dom.childNodes.item(i);
          ????????????????
          if?(typeof?pushFun?==?"function")
          ????????????????????pushFun(array,nodeT,?layer);
          ????????????????
          else
          ????????????????????array.push(nodeT);
          ????????????????recursiveNodes(array,?dom.childNodes.item(i),?pushFun,?layer);
          ????????????}
          ????????}?
          else
          ????????????
          return;
          ????}?
          else?if?(layer?<?0)?{
          ????????
          ++layer;
          ????????
          var?nodeT?=?dom.parentNode;
          ????????
          if?(nodeT)?{
          ????????????
          if?(typeof?pushFun?==?"function")?{
          ????????????????pushFun(array,nodeT,?layer);
          ????????????}?
          else?{
          ????????????????array.push(nodeT);
          ????????????}
          ????????????recursiveNodes(array,?dom.parentNode,?pushFun,?layer)
          ????????}?
          else
          ????????????
          return;
          ????}
          }

          function?formAjax(url,ttform,returnFun){
          ????
          var?datas?=?[];
          ????
          var?arr?=?['input','select'];
          ????recursiveNodes(datas,ttform,
          function(array,node,layer){
          ????????
          for(var?i=0;i<arr.length;i++){
          ????????????
          if(?node.getAttribute?){
          ????????????????
          var?paramName?=?node.getAttribute('name')?;
          ????????????????
          if(?/select/i.test(?node.nodeName?)?){
          ????????????????????array.push(paramName
          +'='+node.options[node.selectedIndex].value);
          ????????????????}
          else?if(?paramName?!=null?&&??/^\s*(\w+)\s*$/g.test(paramName)?&&?new?RegExp(arr[i],'i').test(node.nodeName)??){
          ????????????????????array.push(paramName
          +'='+node.value);
          ????????????????}
          ????????????}
          ????????}
          ????},
          999);
          ????
          //??&#63;
          ????//&?&#38;
          ????var?urls?=?url+'?'+datas.join("&");
          ????AjaxFunction(urls,returnFun);
          }




          posted @ 2008-11-09 18:35 G_G 閱讀(1822) | 評論 (0)編輯 收藏


          function trim(str){ return str.replace(/(^\s*)|(\s*$)/g,""); }

          function recursiveNodes(array,dom,layer){
          ? if( layer==0 ) return ;
          ? if(layer>0){
          ???? --layer;
          ???? if( dom.hasChildNodes && dom.hasChildNodes() ){
          ?????? for(var i=0;i<dom.childNodes.length;i++ ){
          ????? array.push(dom.childNodes.item(i));
          ????????? recursiveNodes(array, dom.childNodes.item(i),layer ) ;
          ?????? }
          ???? }else return? ;
          ? }else if(layer<0){
          ???? ++layer;
          ???? if( dom.parentNode ){
          ?????????? array.push( dom.parentNode );
          ?????????? recursiveNodes( array,dom.parentNode,layer)
          ???? }else return ;
          ? }
          }

          /*
          [@name || && > < >= <= != @location='UK']
          */
          function singleStep(dom,stepAction,stepStr){
          ? var allArrData = [] ;
          ? var arrData = [] ;
          ? var num = stepAction.split(/\//).length ;
          ? recursiveNodes(allArrData,dom,num==2?1:999);
          ?
          ? stepStr = trim(stepStr) ;
          ? var nodeName? ;
          ? var nodeNum ;
          ? var conds = true ;
          ???? //判斷單匹配 是否有 屬性對比? [@..=..]
          ? if( /\[(.*?)\]/.test(stepStr) ){
          ????? nodeName = trim( /.*?(?=\[{1})/g.exec(stepStr)[0]?? ).replace(/\*/g,".*") ;
          ????? conds = /\[(.*?)\]/.exec(stepStr)[1].replace(/\*/g,".*") ;
          ????? if(! isNaN(conds) ){
          ??? nodeNum = parseInt(conds)-1;

          ????? }else{
          ????? //屬性 替換為
          ??????? conds = conds.replace(/(@)(.*?)(?=\W)/g," allArrData[i].getAttribute('$2') ") ;
          ??????? conds = conds.replace( /([\W]+)(.*?)::\'(.*?)\'/g," $1 /$3/g.test($2) " ) ;
          ??????? conds = conds.replace( /(text\(\))/g ," allArrData[i].innerHTML ") ;
          ??????? conds = conds.replace( /([\w\s])(=)/g ,"$2=") ;

          ????? }
          ? }else{
          ????? nodeName = stepStr ;
          ? }

          ? for(var j=i=0;i<allArrData.length;i++){
          ???? if(? eval('/'+nodeName+'/i.test( allArrData[i].nodeName ) ')?? ){
          ??? if(typeof nodeNum=="number"){
          ??? ? if(j==nodeNum){ arrData.push( allArrData[i] );? return arrData; }
          ??? ? else ??? ++j;
          ??? }else if( eval(' allArrData[i].getAttribute && '+conds) ){
          ????????? arrData.push( allArrData[i] );
          ??????? }
          ???? }
          ? }
          ? return arrData ;
          }


          function getXpath(dom,xpathStr){
          ?? var xpaths = xpathStr.split(/(\/{1,2})/g);
          ??? var arrDom = [dom] ;
          ?? for(var i=1;i<xpaths.length;i=i+2){
          ??????? var arrData = [];
          ??????? for(var j=0;j<arrDom.length;j++)
          ????????? arrData = arrData.concat( singleStep(arrDom[j],xpaths[i],xpaths[i+1]) );
          ??????? arrDom = arrData ;
          ?? }
          ?? return arrDom ;
          }

















          ******************************************************************************************************
          function trim(str){ return str.replace(/(^\s*)|(\s*$)/g,""); }

          function recursiveNodes(array,dom,layer){
          ? if( layer==0 ) return ;
          ? if(layer>0){
          ???? --layer;
          ???? if( dom.hasChildNodes && dom.hasChildNodes() ){
          ?????? for(var i=0;i<dom.childNodes.length;i++ ){
          ????? array.push(dom.childNodes.item(i));
          ????????? recursiveNodes(array, dom.childNodes.item(i),layer ) ;
          ?????? }
          ???? }else return? ;
          ? }else if(layer<0){
          ???? ++layer;
          ???? if( dom.parentNode ){
          ?????????? array.push( dom.parentNode );
          ?????????? recursiveNodes( array,dom.parentNode,layer)
          ???? }else return ;
          ? }

          }



          /*
          ? [@name || && > < >= <= != @location='UK']
          */
          function singleStep(dom,stepAction,stepStr){
          ? var allArrData = [] ;
          ? var arrData = [] ;
          ? var num = stepAction.split(/\//).length ;
          ? recursiveNodes(allArrData,dom,num==2?1:999);
          ?
          ? stepStr = trim(stepStr) ;
          ? var nodeName? ;
          ? var conds = true ;
          ???? //判斷單匹配 是否有 屬性對比? [@..=..]
          ? if( /\[(.*?)\]/.test(stepStr) ){
          ????? nodeName = trim( /^(.*?)\[{1}/.exec(stepStr)[1] ) ;
          ?????????????? //屬性 替換為
          ????? conds = /\[(.*?)\]/.exec(stepStr)[1].replace(/(@)(.*?)(?=\W)/g," allArrData[i].getAttribute('$2').toString() ") ;
          ????? conds = conds.replace( /([\W]+)(.*?)::\'(.*?)\'/g," $1 /$3/g.test($2) " ) ;
          ??????? conds = conds.replace( /(text\(\))/g ," allArrData[i].innerHTML ") ;
          ????? conds = conds.replace( /([\w\s])(=)/g ,"$2=") ;
          ? }else{
          ????? nodeName = stepStr ;
          ???? }

          ? for(var i=0;i<allArrData.length;i++){
          ???? if(? new RegExp(nodeName, 'i').test( allArrData[i].nodeName ) && eval(conds) ){
          ???????? arrData.push( allArrData[i] );
          ???????????? }
          ? }
          ? return arrData ;
          }


          function getXpath(dom,xpathStr){
          ?? var xpaths = xpathStr.split(/(\/{1,2})/g);
          ??? var arrDom = [dom] ;
          ?? for(var i=1;i<xpaths.length;i=i+2){
          ??????? var arrData = [];
          ??????? for(var j=0;j<arrDom.length;j++)
          ????????? arrData = arrData.concat( singleStep(arrDom[j],xpaths[i],xpaths[i+1]) );
          ??????? arrDom = arrData ;
          ?? }
          ?? return arrDom ;
          }

          posted @ 2008-09-24 19:57 G_G 閱讀(514) | 評論 (0)編輯 收藏


          Python is a dynamic object-oriented programming language that can be used for many kinds of software development.

          It offers strong support for integration with other languages and tools, comes with extensive standard libraries, and can be learned in a few days.
          offers 提出
          integration 綜合
          extensive 寬廣
          standard libraries 標準庫


          Many Python programmers report substantial productivity gains and feel the language encourages the development of higher quality, more maintainable code.
          report 宣告
          substantial 實質
          productivity 生產力

          posted @ 2008-09-23 09:56 G_G 閱讀(202) | 評論 (1)編輯 收藏

          主站蜘蛛池模板: 卓资县| 清涧县| 许昌市| 莫力| 德安县| 郎溪县| 屯昌县| 璧山县| 永新县| 江西省| 西昌市| 万盛区| 岑巩县| 腾冲县| 十堰市| 邵武市| 隆安县| 安溪县| 米林县| 当阳市| 桃园县| 柘城县| 福泉市| 北票市| 霍山县| 丰顺县| 札达县| 阿克苏市| 泸水县| 德令哈市| 温宿县| 额尔古纳市| 高要市| 石阡县| 垫江县| 尉氏县| 鹤壁市| 青冈县| 乌兰察布市| 鲁山县| 兴和县|