posts - 73,  comments - 55,  trackbacks - 0

          第一篇、http://www.blueidea.com/bbs/newsdetail.asp?id=996916(里面有很多例子)

          第二篇、徹底明白Java的IO系統(文摘)---JAVA之精髓IO流
          一. Input和Output
          1. stream代表的是任何有能力產出數據的數據源,或是任何有能力接收數據的接收源。在Java的IO中,所有的stream(包括Input和Out stream)都包括兩種類型:
          1.1 以字節為導向的stream
          以字節為導向的stream,表示以字節為單位從stream中讀取或往stream中寫入信息。以字節為導向的stream包括下面幾種類型:
          1) input stream:
          1) ByteArrayInputStream:把內存中的一個緩沖區作為InputStream使用
          2) StringBufferInputStream:把一個String對象作為InputStream
          3) FileInputStream:把一個文件作為InputStream,實現對文件的讀取操作
          4) PipedInputStream:實現了pipe的概念,主要在線程中使用
          5) SequenceInputStream:把多個InputStream合并為一個InputStream
          2) Out stream
          1) ByteArrayOutputStream:把信息存入內存中的一個緩沖區中
          2) FileOutputStream:把信息存入文件中
          3) PipedOutputStream:實現了pipe的概念,主要在線程中使用
          4) SequenceOutputStream:把多個OutStream合并為一個OutStream
          1.2 以Unicode字符為導向的stream
          以Unicode字符為導向的stream,表示以Unicode字符為單位從stream中讀取或往stream中寫入信息。以Unicode字符為導向的stream包括下面幾種類型:
          1) Input Stream
          1) CharArrayReader:與ByteArrayInputStream對應
          2) StringReader:與StringBufferInputStream對應
          3) FileReader:與FileInputStream對應
          4) PipedReader:與PipedInputStream對應
          2) Out Stream
          1) CharArrayWrite:與ByteArrayOutputStream對應
          2) StringWrite:無與之對應的以字節為導向的stream
          3) FileWrite:與FileOutputStream對應
          4) PipedWrite:與PipedOutputStream對應
          以字符為導向的stream基本上對有與之相對應的以字節為導向的stream。兩個對應類實現的功能相同,字是在操作時的導向不同。如CharArrayReader:和ByteArrayInputStream的作用都是把內存中的一個緩沖區作為InputStream使用,所不同的是前者每次從內存中讀取一個字節的信息,而后者每次從內存中讀取一個字符。
          1.3 兩種不現導向的stream之間的轉換
          InputStreamReader和OutputStreamReader:把一個以字節為導向的stream轉換成一個以字符為導向的stream。
          2. stream添加屬性
          2.1 “為stream添加屬性”的作用
          運用上面介紹的Java中操作IO的API,我們就可完成我們想完成的任何操作了。但通過FilterInputStream和FilterOutStream的子類,我們可以為stream添加屬性。下面以一個例子來說明這種功能的作用。
          如果我們要往一個文件中寫入數據,我們可以這樣操作:
          FileOutStream fs = new FileOutStream(“test.txt”);
          然后就可以通過產生的fs對象調用write()函數來往test.txt文件中寫入數據了。但是,如果我們想實現“先把要寫入文件的數據先緩存到內存中,再把緩存中的數據寫入文件中”的功能時,上面的API就沒有一個能滿足我們的需求了。但是通過FilterInputStream和FilterOutStream的子類,為FileOutStream添加我們所需要的功能。
          2.2 FilterInputStream的各種類型
          2.2.1 用于封裝以字節為導向的InputStream
          1) DataInputStream:從stream中讀取基本類型(int、char等)數據。
          2) BufferedInputStream:使用緩沖區
          3) LineNumberInputStream:會記錄input stream內的行數,然后可以調用getLineNumber()和setLineNumber(int)
          4) PushbackInputStream:很少用到,一般用于編譯器開發
          2.2.2 用于封裝以字符為導向的InputStream
          1) 沒有與DataInputStream對應的類。除非在要使用readLine()時改用BufferedReader,否則使用DataInputStream
          2) BufferedReader:與BufferedInputStream對應
          3) LineNumberReader:與LineNumberInputStream對應
          4) PushBackReader:與PushbackInputStream對應
          2.3 FilterOutStream的各種類型
          2.2.3 用于封裝以字節為導向的OutputStream
          1) DataIOutStream:往stream中輸出基本類型(int、char等)數據。
          2) BufferedOutStream:使用緩沖區
          3) PrintStream:產生格式化輸出
          2.2.4 用于封裝以字符為導向的OutputStream
          1) BufferedWrite:與對應
          2) PrintWrite:與對應
          3. RandomAccessFile
          1) 可通過RandomAccessFile對象完成對文件的讀寫操作
          2) 在產生一個對象時,可指明要打開的文件的性質:r,只讀;w,只寫;rw可讀寫
          3) 可以直接跳到文件中指定的位置
          4. I/O應用的一個例子
          import java.io.*;
          public class TestIO{
          public static void main(String[] args)
          throws IOException{
          //1.以行為單位從一個文件讀取數據
          BufferedReader in =
          new BufferedReader(
          new FileReader("F:\\nepalon\\TestIO.java"));
          String s, s2 = new String();
          while((s = in.readLine()) != null)
          s2 += s + "\n";
          in.close();

          //1b. 接收鍵盤的輸入
          BufferedReader stdin =
          new BufferedReader(
          new InputStreamReader(System.in));
          System.out.println("Enter a line:");
          System.out.println(stdin.readLine());

          //2. 從一個String對象中讀取數據
          StringReader in2 = new StringReader(s2);
          int c;
          while((c = in2.read()) != -1)
          System.out.println((char)c);
          in2.close();

          //3. 從內存取出格式化輸入
          try{
          DataInputStream in3 =
          new DataInputStream(
          new ByteArrayInputStream(s2.getBytes()));
          while(true)
          System.out.println((char)in3.readByte());
          }
          catch(EOFException e){
          System.out.println("End of stream");
          }

          //4. 輸出到文件
          try{
          BufferedReader in4 =
          new BufferedReader(
          new StringReader(s2));
          PrintWriter out1 =
          new PrintWriter(
          new BufferedWriter(
          new FileWriter("F:\\nepalon\\ TestIO.out")));
          int lineCount = 1;
          while((s = in4.readLine()) != null)
          out1.println(lineCount++ + ":" + s);
          out1.close();
          in4.close();
          }
          catch(EOFException ex){
          System.out.println("End of stream");
          }

          //5. 數據的存儲和恢復
          try{
          DataOutputStream out2 =
          new DataOutputStream(
          new BufferedOutputStream(
          new FileOutputStream("F:\\nepalon\\ Data.txt")));
          out2.writeDouble(3.1415926);
          out2.writeChars("\nThas was pi:writeChars\n");
          out2.writeBytes("Thas was pi:writeByte\n");
          out2.close();
          DataInputStream in5 =
          new DataInputStream(
          new BufferedInputStream(
          new FileInputStream("F:\\nepalon\\ Data.txt")));
          BufferedReader in5br =
          new BufferedReader(
          new InputStreamReader(in5));
          System.out.println(in5.readDouble());
          System.out.println(in5br.readLine());
          System.out.println(in5br.readLine());
          }
          catch(EOFException e){
          System.out.println("End of stream");
          }

          //6. 通過RandomAccessFile操作文件
          RandomAccessFile rf =
          new RandomAccessFile("F:\\nepalon\\ rtest.dat", "rw");
          for(int i=0; i<10; i++)
          rf.writeDouble(i*1.414);
          rf.close();

          rf = new RandomAccessFile("F:\\nepalon\\ rtest.dat", "r");
          for(int i=0; i<10; i++)
          System.out.println("Value " + i + ":" + rf.readDouble());
          rf.close();

          rf = new RandomAccessFile("F:\\nepalon\\ rtest.dat", "rw");
          rf.seek(5*8);
          rf.writeDouble(47.0001);
          rf.close();

          rf = new RandomAccessFile("F:\\nepalon\\ rtest.dat", "r");
          for(int i=0; i<10; i++)
          System.out.println("Value " + i + ":" + rf.readDouble());
          rf.close();
          }
          }
          關于代碼的解釋(以區為單位):
          1區中,當讀取文件時,先把文件內容讀到緩存中,當調用in.readLine()時,再從緩存中以字符的方式讀取數據(以下簡稱“緩存字節讀取方式”)。
          1b區中,由于想以緩存字節讀取方式從標準IO(鍵盤)中讀取數據,所以要先把標準IO(System.in)轉換成字符導向的stream,再進行BufferedReader封裝。
          2區中,要以字符的形式從一個String對象中讀取數據,所以要產生一個StringReader類型的stream。
          4區中,對String對象s2讀取數據時,先把對象中的數據存入緩存中,再從緩沖中進行讀??;對TestIO.out文件進行操作時,先把格式化后的信息輸出到緩存中,再把緩存中的信息輸出到文件中。
          5區中,對Data.txt文件進行輸出時,是先把基本類型的數據輸出屋緩存中,再把緩存中的數據輸出到文件中;對文件進行讀取操作時,先把文件中的數據讀取到緩存中,再從緩存中以基本類型的形式進行讀取。注意in5.readDouble()這一行。因為寫入第一個writeDouble(),所以為了正確顯示。也要以基本類型的形式進行讀取。
          6區是通過RandomAccessFile類對文件進行操作。

          第三篇、花1K內存實現高效I/O的RandomAccessFile類(http://www-128.ibm.com/developerworks/cn/java/l-javaio/index.html),解決RandomAccessFile類效率低下的問題,特別是“與JDK1.4新類MappedByteBuffer+RandomAccessFile的對比”部分講了怎樣用jdk自己的功能實現。

          posted on 2006-06-01 15:04 保爾任 閱讀(249) 評論(0)  編輯  收藏

          只有注冊用戶登錄后才能發表評論。


          網站導航:
           

          <2025年7月>
          293012345
          6789101112
          13141516171819
          20212223242526
          272829303112
          3456789

          常用鏈接

          留言簿(4)

          隨筆分類

          隨筆檔案

          文章分類

          文章檔案

          搜索

          •  

          最新評論

          閱讀排行榜

          評論排行榜

          主站蜘蛛池模板: 石柱| 上饶市| 汪清县| 乐清市| 依安县| 健康| 桦川县| 景泰县| 朝阳市| 南昌县| 石门县| 英山县| 开鲁县| 繁昌县| 邓州市| 天峨县| 扎囊县| 保亭| 小金县| 永泰县| 邯郸市| 新源县| 贵南县| 金溪县| 洛扎县| 台州市| 德令哈市| 竹溪县| 昌黎县| 汝南县| 吴桥县| 博乐市| 葫芦岛市| 长武县| 霍州市| 温州市| 文登市| 贵定县| 辽阳县| 许昌县| 荆门市|